REVscene Automotive Forum
Page 4 of 4 123 4
Show 25 post(s) from this thread on one page

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Maintenance, Engine & Driveline Tech (https://www.revscene.net/forums/maintenance-engine-driveline-tech_190/)
-   -   positive repair shop experiences in the 604. (https://www.revscene.net/forums/177430-positive-repair-shop-experiences-604-a.html)

white_guilt 02-14-2011 08:52 PM
Quote:
Originally Posted by d.to (Post 7287128)
Boundary Brake & Tune
1751 Ontario St
Vancouver

Very low rates.

$40 for oil change. Includes complete inspection + tire rotation + fluid top-up. It's $40 dollars out-the-door price.

They work on all makes, all models, and they're doors are open Sundays and open late on request.
guess that's where i'm going to get my oil and filter changed + spark plugs changed, and air filter changed. unless someone can recommend a better place.

baggdis300 02-14-2011 10:55 PM
theres a place on 2 ave near the cambie street bridge i got my oil changed there for 25$ out the door, when i was working @ the olympic village

i google earthed the shop

its called apollo muffler & speedy brake address is 371 2 ave W

bcrdukes 02-15-2011 12:25 AM
Quote:
Originally Posted by baggdis300 (Post 7305787)
theres a place on 2 ave near the cambie street bridge i got my oil changed there for 25$ out the door, when i was working @ the olympic village

i google earthed the shop

its called apollo muffler & speedy brake address is 371 2 ave W
Do not go to this shithole

baggdis300 02-15-2011 01:01 PM
well, then i went there two years ago, not a single problem....

then again i watched the oil change bitch do the oil change..

Crux 07-23-2011 07:02 PM
Freeway Mazda in Surrey (http://freewaymazda.ca/)

Swapped out my rear diff mount, front diff brace and rear motor mount replaced with aftermarket SURE components.

Quoted 4.5 hrs, took 8, paid for the quote and an oil change.

For a dealership, I'm impressed.

XplicitLuder 08-01-2011 11:23 AM
anyone recommend any good shops for a tune-up ? dealerships or just regular shops are fine, if dealership it's gotta be a Honda one

str6nger 08-03-2011 03:47 PM
in da Ghetto
 
Cava autobody. they charge reasonably right across the street from salvation army building on East Cordova Street block west from Main street.

benr 10-26-2011 02:24 PM
i like the guys at Rise Auto Salon.

Rae604 09-27-2012 01:13 AM
Where's a good shop to go for an engine work on a 2006 325i BMW ?
Posted via RS Mobile

adevita 05-23-2013 11:03 PM
Bernes auto repair in coquitlam, swapping the otor in my 350z right now great rates
https://www.facebook.com/pages/Berne...988?ref=stream

jde100 12-27-2015 08:47 PM
Amir from Marci Automotive, BMW expert, very friendly and knowledgeable. I'm planning to go back to have some performance upgrades done to my E30.

jackruthie 03-17-2016 09:41 PM
Has anyone tried bolt kits?

PST | Front End Kits | Disk Brake Kits | Sway Bars

ijaz_97 05-26-2016 03:14 PM
I can vouch for The Speed Syndicate and Art's Automotive. Only two places I trust with my car for honest and reliable work.

Charak 01-10-2017 10:11 AM
Quote:
Originally Posted by originalhypa (Post 2261394)
Is there a local shop that had done good repair work for you or a friend?

post them up.
Autform has been around a while and the state of the art shop that does all repairs on all makes and models especially higher end vehicle is open on 344 West 7th.

Good work, nice shop and much much cheaper then the dealer with the same work

Charak 01-10-2017 10:40 AM
$$$$$$$$ Service Centre on west 7th. Just completed and 1979 Porsche 911 Targa also working on Ferrari 360 Spider resto. The shop does regular service and maintenance on all cars and diagnosis all vehicle with most factory tools for Diag work on Porsche BMW Mercedes Etc.

abigailcarson73 01-11-2017 01:25 AM
Yes, there is. Check out here https://www.autotrade.com.ph/

Swonz 01-28-2019 09:16 AM
Wow this is a great thread.

I've had a good experience at MDA Fabrication

Vancouver_XJS 03-13-2019 12:23 AM
BMC Motorworks in East Van, deals mostly with older British cars but will take on alot of other stuff, extremely honest shop, the owner has saved me countless hours (and money) even when I insisted on paying for an unnecessary job, these people don't miss anything.

Sprayed 04-04-2019 08:33 AM
I'm wondering if anyone has recommendations for shops to do required work and an inspection for a vehicle I am importing. Preferably close to the New West port

trollface 05-26-2020 01:36 PM
I thought all imports had to go to crappy tire.

immorality 10-04-2024 07:45 AM
Quote:
Originally Posted by trollface (Post 8987660)
I thought all imports had to go to crappy tire.
No, but Canadian Tire is everywhere which is convenient. The import inspection is pretty simple and straight forward. I've taken cars to CT (for import inspection) without issue.


All times are GMT -8. The time now is 11:15 PM.
Page 4 of 4 123 4
Show 25 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net