Okanagan Automotive Chat Kelowna, Penticton, Vernon, Kamloops, BC Interior and beyond.
BC Interior Auto-Related Discussion.. |
 | | 
02-09-2005, 01:12 AM
|
#676 | | OK Head Mod
Join Date: Nov 2002 Location: Kelowna
Posts: 6,963
Thanked 5 Times in 3 Posts
Failed 0 Times in 0 Posts
|
oh time to whore up my own thread...
the last two evenings consisted of alot of drilling...
last night as i was taking off my exhaust manifold to fix a snaped stud in the head... of course.. my manifold to turbo bolt snaps off in the turbo...
so i got out the one in the head easily as ever, then the turbo bolt.. stainless steel 10mm bolt... took forever with the die grinder, dremel, drill, torch.. etc etc
but at least now, no more exhaust leaks under the hood
__________________
'05 F150 FX4
| 
|  | |
02-09-2005, 08:28 AM
|
#677 | | RS Veteran
Join Date: Aug 2001 Location: Penticton
Posts: 7,760
Thanked 429 Times in 39 Posts
Failed 0 Times in 0 Posts
|
Hrm.. this morning took my entire exhaust syustem off from DP back today. oh what fun it is. I forgot how fun open DP really was  *Vroom* *weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee* <- Turbo whine on the downflow
__________________
Formally Known as G2Teggin
Follow Me on Instagram @ tommtomm84
02 BMW M3 - Supercharged
94 BMW 318 - M3'd and M50'd - SOLD
90 Integra GS-Turbo - 11.180 @ 140.86mph DOT Tires - SOLD
| |
| | |
02-11-2005, 07:06 PM
|
#678 | | RS Veteran
Join Date: Aug 2001 Location: Penticton
Posts: 7,760
Thanked 429 Times in 39 Posts
Failed 0 Times in 0 Posts
|
Installed a A/F gauge to a pillar for a buddy and also remounted his boost gauge to the pillar. Install went clean and good. Next up, my box on wheels tomorrow 
__________________
Formally Known as G2Teggin
Follow Me on Instagram @ tommtomm84
02 BMW M3 - Supercharged
94 BMW 318 - M3'd and M50'd - SOLD
90 Integra GS-Turbo - 11.180 @ 140.86mph DOT Tires - SOLD
| |
| | |
02-11-2005, 10:57 PM
|
#679 | | Need to Seek Professional Help
Join Date: Dec 2003 Location: Kelowna
Posts: 1,069
Thanked 6 Times in 4 Posts
Failed 0 Times in 0 Posts
|
Mod of the day:
Tested out the sub box today.... oh fuck yeah.. this thing sounds wicked. Still have to finish it and carpet it up. Other than that its sounds killer. I dont have my Alpine amp hooked up to it either. Right now just have a 2 channel amp I had layin around its rated at 50w x 2 rms its only about 5 or 6" in size and 3" deep. I have it running 3channels (front speakers and the sub running off the bridged terminals) and its enough to kick pretty hard. cant wait to feed it 558rms!!!
| |
| | |
02-12-2005, 12:40 AM
|
#680 | | Okanagan Mod Team
Join Date: Apr 2002 Location: Kelowna
Posts: 8,438
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
heh, adda boy, im pumped to hear it.
My brother bought 38.5x14.5 Super swampers today.
Now im depressed i need big tires
__________________
2007 Mitsu Eclipse
R.I.P :1994 Dodge 2500
Sold :1993 Prelude SR-V
| |
| | |
02-12-2005, 12:01 PM
|
#681 | | Banned (BBM)
Join Date: Nov 2001 Location: I <3 Kamloops
Posts: 18,478
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
Finally got my front lip back on yesterday (took it off for my VI so it'd look higher), also put a chrome doorhandle on the pass. side as well (was running chrome on the left and black on the right for a year or so). What else...oh yeah...my clear tails are back on as well...(took'em off for the VI)...finally back to looking like my truck  | |
| | |
02-12-2005, 04:06 PM
|
#682 | | Rs has made me the man i am today!
Join Date: May 2002 Location: Penticton
Posts: 3,223
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
Took one of my drums off to find out a spring snapped and FUCKED my whole drum brake assembly...
Bent shoe that dug a gouge into the drum, tore the wheel cylinder apart, and snapped the adjusting wheel.
I'm lucky the drum didn't blow apart on me.
__________________
'01 Honda CBR 600 f4i
| |
| | |
02-12-2005, 05:32 PM
|
#683 | | Everyone wants a piece of R S...
Join Date: Sep 2003 Location: Slammin arm
Posts: 368
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
| Quote: Originally posted by G2Teggin
Installed a A/F gauge to a pillar for a buddy and also remounted his boost gauge to the pillar. Install went clean and good. Next up, my box on wheels tomorrow |
thanks for the help on that man, very nice work. Sucks living in an apartment with only a ratchet set and wrenches at my disposal 
brought'er up to 13 psi, its getting pretty peppy. Few more psi to go....
| |
| | |
02-12-2005, 06:03 PM
|
#684 | | RS Veteran
Join Date: Aug 2001 Location: Penticton
Posts: 7,760
Thanked 429 Times in 39 Posts
Failed 0 Times in 0 Posts
|
haha easy
On a side note.... FUUUUUUUUCCCCCCCCCCCCCCKKKKKKKKKKKKKK
I took my turbo setup off today to install the new stuff only to find after taknig fof the turbo the compressor seal is blown right the fuck out and spewing oil everywhere. OMG it's only got 7000km's on it and costed me like 750 bucks!! Now I have to find anotehr turbo ASAp WTF I don't got the cash for that shit! Worst comes to worse I jsut reuse the abd turbo so I can atleast move my car around etc and not boost or rev it or anything till I can get moeny to get my new turbo. but FUCK. FUUUUUCCCCCCKKK I could kill someone right now.
__________________
Formally Known as G2Teggin
Follow Me on Instagram @ tommtomm84
02 BMW M3 - Supercharged
94 BMW 318 - M3'd and M50'd - SOLD
90 Integra GS-Turbo - 11.180 @ 140.86mph DOT Tires - SOLD
| |
| | |
02-12-2005, 06:40 PM
|
#685 | | Rs has made me the man i am today!
Join Date: May 2002 Location: Penticton
Posts: 3,223
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
| Quote: Originally posted by G2Teggin
haha easy
On a side note....
FUUUUUUUUCCCCCCCCCCCCCCKKKKKKKKKKKKKK
I took my turbo setup off today to install the new stuff only to find after taknig fof the turbo the compressor seal is blown right the fuck out and spewing oil everywhere. OMG it's only got 7000km's on it and costed me like 750 bucks!! Now I have to find anotehr turbo ASAp WTF I don't got the cash for that shit! Worst comes to worse I jsut reuse the abd turbo so I can atleast move my car around etc and not boost or rev it or anything till I can get moeny to get my new turbo. but FUCK. FUUUUUCCCCCCKKK I could kill someone right now. | Interested in a trade?
I think I found somewhere that does decent price rebuilds.
Or I can just find out the place that does it for you 
__________________
'01 Honda CBR 600 f4i
| |
| | |
02-12-2005, 06:41 PM
|
#686 | | RS Veteran
Join Date: Aug 2001 Location: Penticton
Posts: 7,760
Thanked 429 Times in 39 Posts
Failed 0 Times in 0 Posts
|
I can rebuild it myself it's easy. It's the rebalancing that is needed which not many places that rebuild turbos do. I'm looking into a ball bearing turbo i think
__________________
Formally Known as G2Teggin
Follow Me on Instagram @ tommtomm84
02 BMW M3 - Supercharged
94 BMW 318 - M3'd and M50'd - SOLD
90 Integra GS-Turbo - 11.180 @ 140.86mph DOT Tires - SOLD
| |
| | |
02-13-2005, 12:04 AM
|
#687 | | I am Hook'd on RS
Join Date: Jan 2005 Location: Pen, BC
Posts: 94
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
If it's just a seal that needs to be replaced, then it's real easy to pick up a rebuild kit, pull it apart and replace the seals/bearings.
Just take a look at the compressor nut. If it's ground down a bit then you can tell it was balanced as an assembly and you can just mark the nuts/wheels so you put them back exactly as you took them off. Meaning it'll still be balanced. If the nut isn't ground down at all, then usually that means that they've been balanced individually so they should be good to go back on whatever way.
The hardest part is removing the exhaust housing without snapping the bolts off. The torch is your friend!
Balancing is pretty cheap anyways if you know a place to get it done. It's shipping that costs the most if there's no local place.
| |
| | |
02-13-2005, 03:44 PM
|
#688 | | Need my Daily Fix of RS
Join Date: Jul 2002 Location: kamloops
Posts: 298
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
| Quote: Originally posted by G2Teggin
haha easy
On a side note....
FUUUUUUUUCCCCCCCCCCCCCCKKKKKKKKKKKKKK
I took my turbo setup off today to install the new stuff only to find after taknig fof the turbo the compressor seal is blown right the fuck out and spewing oil everywhere. OMG it's only got 7000km's on it and costed me like 750 bucks!! Now I have to find anotehr turbo ASAp WTF I don't got the cash for that shit! Worst comes to worse I jsut reuse the abd turbo so I can atleast move my car around etc and not boost or rev it or anything till I can get moeny to get my new turbo. but FUCK. FUUUUUCCCCCCKKK I could kill someone right now. | don't get to excited just yet, before you plame the turbo just do a couple of checks first if you haven't already , check your oil return line make sure you have good return flow (restricted or blocked) and also that your not pressurizing the crankcase either these can cause oil back up give this symptom seen it alot , hope this helps you if the turbo does need attention leave it to a professional turbo builder with all the wright equipment and tools we don't even fuck with them not worth it get it done wright we have a reputable turbo shop do all ours if you need don't hesitate to call me at the shop i'll get you in contact with them.
geno
__________________
-95 civic dragon edition,D16Y8 SOHC V-TEC n/a 14.69@93.2 mph 2505lbs w/driver ashcoft 2007
-blown 68 firebird 9.89@140 10psi boost pump gas 3840lbs 2010 ashcroft streetlegal
-nitrous is like a hot chick with std's you want to hit it but affraid of the consequences but when you do you know it was worth it
Last edited by 68bird; 02-13-2005 at 03:47 PM.
| |
| | |
02-13-2005, 07:29 PM
|
#689 | | RS Veteran
Join Date: Aug 2001 Location: Penticton
Posts: 7,760
Thanked 429 Times in 39 Posts
Failed 0 Times in 0 Posts
|
yeah truen lnie and feed lnie is fine. feedline has restrictor as well. i ran into ther problems anwayys so I cant' be bothered with fixing it right now.
__________________
Formally Known as G2Teggin
Follow Me on Instagram @ tommtomm84
02 BMW M3 - Supercharged
94 BMW 318 - M3'd and M50'd - SOLD
90 Integra GS-Turbo - 11.180 @ 140.86mph DOT Tires - SOLD
| |
| | |
02-16-2005, 09:05 PM
|
#690 | | Banned (BBM)
Join Date: Nov 2001 Location: I <3 Kamloops
Posts: 18,478
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
w00t....H4 conversion done for my truck Forgot to put the freaking dust-boot on one, though, so I gotta rip it all apart...gonna do it when my grille gets here
*sigh* and now I found a diamond cut H4 kit for 30 US which seems RIDICULOUSLY low....so I'm thinking it's either 30 each or it's shitty quality | |
| | |
02-16-2005, 09:06 PM
|
#691 | | RS Veteran
Join Date: Aug 2001 Location: Penticton
Posts: 7,760
Thanked 429 Times in 39 Posts
Failed 0 Times in 0 Posts
|
Mounted the new thick aluminum rad Mmmm PWR
__________________
Formally Known as G2Teggin
Follow Me on Instagram @ tommtomm84
02 BMW M3 - Supercharged
94 BMW 318 - M3'd and M50'd - SOLD
90 Integra GS-Turbo - 11.180 @ 140.86mph DOT Tires - SOLD
Last edited by Tchleung; 02-16-2005 at 09:09 PM.
| |
| | |
02-17-2005, 01:03 PM
|
#692 | | Banned (BBM)
Join Date: Nov 2001 Location: I <3 Kamloops
Posts: 18,478
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
niiiiice dude
phew...found out that the headlights I found were priced *EACH*...sticking w/ mine | |
| | |
02-17-2005, 06:54 PM
|
#693 | | 14 dolla balla aint got nothing on me!
Join Date: Feb 2003 Location: Penticton
Posts: 660
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
changed my oil and tranny fuild
want to pu the stock headlight back in but it was too cold for me....
__________________
Rocking DCCD
2006 WRX STi Aspen White
1992 Hatch Si B16a2 * sold *
1992 Hatch DX d15b7 boosted 14.4@101 mph 2.3 60ft RIP
1992 Hatch DX GSR stock *sold*
14.6 @ 94 mph 2.3 60 fts
Buyer / Seller feedback http://www.revscene.net/forums/showt...hreadid=164635 | |
| | |
02-17-2005, 07:04 PM
|
#694 | | Everyone wants a piece of R S...
Join Date: Oct 2002 Location: Axel's Auto
Posts: 354
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
| Shitty repair
I found this about 2 weeks ago, gotta fix it, but no welder down here, so I'll have to devise another scheme. It's in the passenger footwell...of my 240sx 
__________________
91 240SX 11.49@122 mph
*Sold*92 Civic Si Hatch 14.04 @
97.462 mph Quote: Originally posted by autoxer
umm... WTF are you talking about danny? | I tried to join the Buddy Club, but they said that my Spoon wasn't big enough, so I talked to the Toda, and he said the Jun bug could help me out, but he said that the pursuit must be Endless. I think they're all afraid of my pet skunk2. Greddy or not, here I come.
| |
| | |
02-17-2005, 07:12 PM
|
#695 | | My homepage has been set to RS
Join Date: Mar 2004 Location: Kerona
Posts: 2,284
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
ewww damn...
i have one of those too.
__________________
1996 Chev. Silverado Z71
2000 Yamaha YZ125
| |
| | |
02-17-2005, 07:16 PM
|
#696 | | Banned (BBM)
Join Date: Nov 2001 Location: I <3 Kamloops
Posts: 18,478
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
| I love your sig dude.
nothing done to the twuckie today, but I went over to a buddy of mine's house and did the alternator, strut bar and heater on his Cavalier...w00t | |
| | |
02-17-2005, 08:24 PM
|
#697 | | Need to Seek Professional Help
Join Date: Dec 2003 Location: Kelowna
Posts: 1,069
Thanked 6 Times in 4 Posts
Failed 0 Times in 0 Posts
|
17's | |
| | |
02-18-2005, 01:10 AM
|
#698 | | Banned (BBM)
Join Date: Nov 2001 Location: I <3 Kamloops
Posts: 18,478
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
wicked...pics? | |
| | |
02-18-2005, 11:02 AM
|
#699 | | Need to Seek Professional Help
Join Date: Dec 2003 Location: Kelowna
Posts: 1,069
Thanked 6 Times in 4 Posts
Failed 0 Times in 0 Posts
|
I'll try and get some up tonight.
| |
| | |
02-21-2005, 01:01 PM
|
#700 | | Banned (BBM)
Join Date: Nov 2001 Location: I <3 Kamloops
Posts: 18,478
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
|
w00t...my chrome grille w/ the billet insert is here...and I just installed it...pics coming in a couple mins | |
| | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
All times are GMT -8. The time now is 06:28 PM.
|
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
