just by the kit don't mix diffent bolt in there i very strough agaist doing that

plsu the kit cheep any wya

hummm i am in dilly of a dealio right now


i am seeing if i want remove my egr

i can care less about nox but i don't want to run lean

i have done alot of reading in some of the books i got on my computer

see the nox takes up air space that you car sucks in right and takes away form the no2 that you car sucks in so less air more fule but when you replace the nox whiht no2 you get more air but he same fule (aka learner) but this is only at half throttle

see the egr is closed at aidle and at wot

plsu alls so whe you have the nox in there it stops detation at cruse caus eit lowers you combustion temps (aka throttel respons)

in theroy the stock nock sencer should beable to stop the deation and the fuel should richen it self up but only by so much

now the proper way of doig it is getting jdm ecu cause it has diffent fuel map to make up for not haven a egr



but many peoepl have run this and not have probs far as i know so that si why i am thinking on doing it caus eio have bad ish egr i think have not cheaked but shows systoms that i do


plus all so if you have no egr you will have better fule milage cause you car is runing leaner then norm




one think i am really thing on doing it blocking off the coolent goign to the throttle body
to the loer the intake temp as well i wright more of this when i am not as drunk /high

My EGR was disconnected when I got the car - After the BHG they reconnected it when they put the head back on and I have noticed that my car gets to running temp a lot faster than it did before. Power wise Its hard to say if I gained anything, the new plugs are probably responsible for most of the improvement.

build your own damn theme park!

well yes it will take longer to warm up if you have no egr

i think i put that down and stuff

humm muray i think you had a bit wee to much to drink cause what you said does not make senc in any way

yeppy sending my turbo in today


it all going to getter now muahahaha

rebuild? upgrade? if so, what trim? have u heard of this company doing other CT26's? ofcourse you know whats gonna happen if it isnt balanced perfectly...

my freakin hardpipes are gonna take forever to polish... arggh but it'll look so good :cool:

*does a little dance, then runs away*

And the Useful Post of the Day award goes to...

:p

well the trim size will be about 54 or a 57 and still thinking if i should clip or not


the cliping thing i don't like but in some cause it should be done from what they said

so it kinda still up in the air but it will be sweet when it is done muahahhahahh


it there as week speak getting cleaned and then on monday they will be calling me and then we will discuse flow maps and suck o what i wan tot run

I going to tim's tonight who's gona show

all be in the new truck 2003 toyota tacome trd off road ehhehe really turqy tooo

you should try my tape, motivate > demonstrate then motivate again!


no ones ever had a problem with this :p

So... who wants to helicoil my head? I'll buy beer :D

Shall I send him to hell, Maurice?

And now, for something completely different....

spinning complacently in the darkness covered and blinded by a blanket of little lives,
false security has lulled the madness of this world into a slumber, wake up!!
an eye is upon you, staring straight down and keenly through,
seeing all that you are and everything that you will never be.
yes, and eye is upon you, and eye ready to blink.
so face forward, with arms wide open and mind reeling.
Your future has arrived ...
are you ready to go?

life is cheap, man. and then you die. if you prepare for the afterlife now, YOU will be able to summon spirits!

our news papers are run by CANADIANS with an agenda! our very way of life is threatened, we formed this great state to play golf! and i'll be damned if any weirdo hippies gonna tell us we cant fill in wetlands and build homes!

hummm ??????

so taping did not work did not think it whould or at lest more of a pain to do


up date on car the bloody cat walk all over my hood and stuff now i have kitty prints all over it liek every god dame fucken spot



so i just goingot have to cut off both cats paws but then i will have bloody stump prints all over my car

Powerman 5000 and new Deftones 0wnZ j00!

so hows the car's going guys

i need new shocks, but im still unsure if i should cut my stockers... or wait to buy some H&Rs... god damn bills... might start in on my stereo if its nice out this week...

i say cut the stocker's man what do you got to loose really i have bena in mrk 3 whiht cut springs befor was not as bouncy as i though it whould be


it was bule 90 that was at the dealer ship the only concern i had against it was the spring were not as stiff as the one si got in my car but he handleing over stock was much improved



as long as it is cut = on all coner and stuff then you have nothign to worrie about


ps the buel one had about 1 1/2 ich drop all around


you can even cut the coil's your self at hoom just measher frist befor cutting only cut 1 1/2 coil off that is about 1.5 inc drop


to cut spring you can do 2 way's hack saw or bolt cut bolt cuters being the fastest