get a wrench, and tighten it down to specs... is that so hard?

okso yae i can do that but qestions

a is it fule injectoed i think it is is cause that why there is an e in the enigne block number

that si the same motor that s in the nx2000 1. 6 liter or is it the 2 liter
do you have tools where do you live

Fuel Injected Yes.
No it is not the same (NX is GA16DE and mine is CA16DE) but I assume rather similar.
I have all the tools I think (not 100% sure though).
And I live in View Royal.

toby i talked ot ash he said 100 bucsk cause that is what i paid wheni got mine done and make an apoinment cause there busy right now i told him about you so just say you know me supra and that you have maron one and stuff

there very simler motors cause the gasket kit is the same pretty much for the 1600 cc one but any way i book you in in my next days off will be after port thou or mabye this tues wendasy but i don't know causei got ot get my car ready for port and such

OK sounds good man thx.

Just wondering if anyone is interested, in a set of ADR Stage-II rims. They are all in their box's and sealed up, NEVER USED/Mounted. They are a perfect fit for a supra,(i have a 89 turbo), but before they arrived i did some damage to my car and had to get it fixed, i dont have anymore money to buy tires. they are 18x7.5" and have a universal 5-bolt pattern, offset is +42.

pictures are availalbe here...

$1100 PM me with any questions

http://members.shaw.ca/darinsavage/images/DCP02048.JPG

looks nice, too bad i have no money

Ryan if you can clear some time you can get a hold of me quicker by phone than on here.
If you can, gimme a call at 704-1104.

well hector finally got teh prototype for the DP hes going to be selling...

http://www.bpustore.com/supra91/eddp1.JPG

i cant wait to get mine :)

will do


but you may have to remind me here and there cause some tie i forget thigns and crap

to narrow for me 7.5 will not cut it for me

that is an ok peaces but some thing i don't like thous is the way the o2 flage goes towords the exhuast turbine wheel

its the same way with the stock peice....

nope the stock elbow the o2 goes stright down

the one exhuast depo makes make the probe go in to the turbine blade

well not intot eh blade but it angle towards the blade

should be stright up down for proper readings and such


thsi is what i was told and beleav it as well

ok, im sure that the 5 degree angle will cause yoru car to run liek crap....

meh so i was told but really i don't see it doing any harm

o2 sensors are for pussies! :D

realistically tho, doesnt really matter where the probe is aslong as its in the exhaust flow, i thought i may have had probs with my elbow because the sensor sits pretty high and out of the way, but so far its working perfectly :)

haha, dope, its about damn time! saw the pics on his site, it looks pretty nice

heres a comparison...

stock

http://pxi.ath.cx/misc/stockelbow.jpg

mine

http://pxi.ath.cx/supra/misc/elbow01.jpg

hectors (most custom jobs have the o2 sensor like this)

http://www.bpustore.com/supra91/edelbow1.JPG


only real concern i can think of is the o2 sensor being restrictive in the exhaust... but honestly, how much of a difference is it going to make?

i just want mine....

well your's is in good spot muray you don't want it right in the turbine way you want stight down so that way the o2 can read good

but really it really does not make diff mabye over time it will but blaaa

fixed my mbc, cranked it to 8... then 10... ooo thats fun! ill leave it at 8 for now though....

Hey Nash here's an update. The mechanic who screwed my engine up originally came over today and took off the manny for me.
Im takin it to Vic Nissan tomorrow and they'll fix it all up.
I'm gonna talk to the guy about putting it back on tomorrow.

More News as it comes...

fun stuff eh


you got pretty much full exhuast go to 10 psi wiht no worry stop playing the play it safe game cause it is not need go to 10 psi