![]() | |
well next supra you want to buy, we'll all check it out with you and make sure you get a good one. so your going to save some money, take the bus for awhile? good idea, i was finally out of debt in august... and then i started in on it again in september... only another 3 years and $15,000 +/- to go hehe |
heh, wellll, I'm saving for school for next september, and also a trip to Australia! I'm gunna end up taking out a student loan in sept..so who knows when I get another supra. Sooner the better. Buhah |
well the supra was not that bad but ummm the guy said it was mantian liek god liek and it was not it just had some small probs that was fixed plug wires cracked ic hoses loose ic hose clamps vavle cover gasket bolt were ion finger tight plus were gone dead as every shifter gaskets were toast bad rad cheepo fix in the end it was small things but still was not matian liek he said it was or how he talked about how he ketp it and stuff see my car is runign right all the tiem mostly be side my lazy ness ( heheheh still got replace my o ring cps gasket heheheh) eh you can all wasy find a mk 2 supra you can get em cheep too and there fun cars and better yet if you stuff a 7mgte in them there even better |
Okay, have any of you suave motherfuckers driven a Mark II Supra? I really like the looks of them, but what are they like? Do they handle well? Did any of them come turbo'd, or what? What's the scoop? |
driven one, very nice cars. alot lighter than a MKIII, and the 7M turbo engine drops right in.... |
Quote:
what i mean about the pump is it has to be cut and the tube moved so t can get eh oil you need not hard at all some peoe;l just bend then any way but the last project i did i just got t welded other the that it is pretty easy just need the motor and oil filter reloction kit oh and custom drive shaft again that si easy just have to weld the stock 5 m driver shaft ot the last bit of the 7m driver shaft and exhuast 3 inc as for the price on my buddies car that i did the tolota cost to make this fun toy was under 3000 bucks that wiht new shock and every thing needed and int he edn you will ahve about 2700 pound car wiht about 250 rwhp and close to 300 turq on just small bpu mods that cost likel nothing i really want to pick up and 85 supra and then slap on the celca gts front end and of course a 7mgte motor that si the prog i really wana do caus eit will rape alot of cars ont eh road pretty easy you can build a 14 secound mrk 2 for about |
14 sec mk2? a decent running mk3 with i/e/mbc and a good driver should getting 13.5s with traction. a mk2 with similar mods should get low 13s/high 12s |
not really ture mrk 2 are not that good there about a 14 secound car acouding to most peoep on the celica supra frusm that about the ties they get close to a 13 but still int he 14's the best onei saw was 13.9 on every thign stock fuel and turbo btu at 13 psi remmber the mrk 2 is about 400 punds hever but the mrk 3 has better sption then the mrk 2 for draging but the mrkl 2 has the weight saveing's but the bad part about the mrk 2 is you can remove to much of the weight caus eevery thign that si int he thing is light as hell the mkr 3 wiht mbc blaa blaa blaa on it get about 14.5 some thign mu buddies car got weighed in at 3070 my car is about 3300 wiht low on gas pretty much emty and his car has abotu teh same weight saveing as my car as in removed about the same stuff |
ryan, i/e/mbc, with traction and a good driver, you should be getting ~13.5 the reason most people cant get that is they cant drive, or they have shitty tires. |
ok that is what i read |
you could have done a better time, but you had shitty traction |
so keegan old car is wright off now humm that supra lasted long oh well that menas part's i guess i wounder were it will end up |
im just glad to hear it wasnt any of you guys. drive carefully in the rain! |
but goign side ways down the highway is fun ehhe |
so your car get's fixed on saterday toby hehehe but i want your t bolt clamp heheheh |
your not gettin the clamp off my car you hoser ill grab another one from kenny. |
cool |
how much are t-bolts from kenny? |
30 bucks each |
Hey ryan, you got a battery charger that I could borrow for a day? lol |
wonder if kenny would trade me some 2.5" t-bolts for all those 3" i have... |
Quote:
|
it was $8.90 with tax for a 3" t-bolt. probably about $10.50 for the 3.5" one that ryan needs |
what do you think about this kit? Diana Godfather bodykit. http://img35.ac.yahoo.co.jp/users/1/...8590863001.jpg |
|
All times are GMT -8. The time now is 12:49 PM. | |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net