REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Island Off-Topic (https://www.revscene.net/forums/island-off-topic_147/)
-   -   Toyota supra chat thread (https://www.revscene.net/forums/39394-toyota-supra-chat-thread.html)

islandsupra 08-01-2004 11:34 PM

thanks man!

NashMan 08-02-2004 06:35 PM

or yo8u can go the big money root liek me hehehhe never have to worrie abotut eh bottom end again

yae i am back in victoria yae

NashMan 08-02-2004 06:37 PM

i thinking of power adder right now zex kit but i don't know i looking into it right now

i am think i might go dry with a55 shot or 55 wet

but i gonna wight for the motor to be done frist thou

but the big thing thou will my clutch hold all of this what i am doing i kinda getting tot eh word no i will fryit so i migth sell just teh dsi and go wiht solid 4 puck clutch since the tranny can take the abuse now

Enraged 08-02-2004 07:52 PM

no need for a solid hub man, look into some other clutches. spec stage 3 would work, or maybe you can just get an upgraded disc for your ACT clutch.

NashMan 08-03-2004 06:42 AM

meh soild is great when the tranny can take it

but i think i will just kill my act if any thign i herd they can hold alot fo power over there rating and stuff


i wana get my car on 7mpower.com and i might beable to i think caus ei was looking on there and they have some gusy at 411 and stuff and i think my car will do that well at lest hope so

Matt6003 08-03-2004 08:19 AM

Hey guys, I'm still looking for an MKIII that runs well for less that $6000 so if you know of any please let me know.
Thanks, Matt

NashMan 08-03-2004 05:33 PM

well i gave you number that you cna call he will be droping in motor for it any way

NashMan 08-03-2004 05:33 PM

sweet manafodl is done i can't weight to see the fainle produck hehehhe still no motor thou

Enraged 08-03-2004 11:47 PM

i want to see that manifold! :)

Paradox 08-04-2004 12:45 AM

why do you need so much damn money in a bottom end if you plan to barely break 411hp? :p

Enraged 08-04-2004 01:16 AM

:lol

NashMan 08-04-2004 06:16 AM

Quote:

Originally posted by Paradox
why do you need so much damn money in a bottom end if you plan to barely break 411hp? :p
relibilty

and stuff and i think i may break 400 pretty easy but we will see

NashMan 08-07-2004 08:23 AM

humm well i just odered

injectors

fule pump

polly bushingings

afpr

safc


geeeezzzz is my wallet tired

plus i t5hinki fucked up my odered for supra sport by given em the wroung id number ont eh back of my card i wounder if i will have to re order ti all

NashMan 08-07-2004 04:12 PM

ok people can you find me lex afm local and such i kinda don't wana get hat off ebay but some one i cna trusta nd not fuck me over for my money

NashMan 08-07-2004 04:12 PM

ok people can you find me lex afm local and such i kinda don't wana get hat off ebay but some one i cna trusta nd not fuck me over for my money

Enraged 08-08-2004 12:33 AM

jeff at suprasport was selling two, for US$165. however, the MAFT is $199 - $20 coupon for supramania members, so US$179, then you can probably talk to your neighbor to get the MAF that you need for cheap ( 3" corvette MAF works i think)....

NashMan 08-08-2004 11:44 AM

there are no gains to going math that i see in less i push juice the i just say fuck to maf and run enamge if i goign that root

plus it pain to tune iu have bean asking dj and he says it works but no gains that you can't get wiht the setup that i am runing

so i am set wiht lex just got ot find one or mabye get eh ss one form super sport that way i don't have to make screw

NashMan 08-08-2004 08:22 PM

brain storm i think i have found away to run a race gate in my car or wate gate what ever but i think i ahve founda away i am so excited now caus ethat whould be hella pimp and might be able to get it done for cheep

Enraged 08-08-2004 10:04 PM

ya, run a small spacer. get a block of 304 stainless, get kenny to cut it to shape and add a flange on one side for the WG... hell, i could do it if i had the tools :)

NashMan 08-08-2004 11:39 PM

Quote:

Originally posted by Enraged
ya, run a small spacer. get a block of 304 stainless, get kenny to cut it to shape and add a flange on one side for the WG... hell, i could do it if i had the tools :)
but he big thing thou is room i might not have it you need liek at lest a 1 1/2 inc hole that is moven the trubo alot mixed with enigne move around = pout to hit shell of the car but we will see just an idea i was thinking of

legally blonde 08-09-2004 07:34 AM

How did it go last night hun... did you get the oil cooler out and every thing??? where are you at now!???? DO TELL!

NashMan 08-09-2004 11:14 PM

well i did alot today i am doing my eletracal work now i am move stuff around and relaotin my battie as wwell

AVNGinger 08-10-2004 07:47 PM

electrical work sucks, i made an attempt at re-wiring my foglights, so i tried following the wires for the foglights and jesus, what a pain in the ass, i gave up when i realized that the wires go into the fender to get to the dash.

Quote:

Toyota Supra 86.5 Turbo 7MGTE 13.8 @111 MPH Traction What Traction
didnt the turbo Supra not come out until 87?

Enraged 08-10-2004 11:19 PM

yup. ryans is an 86.5 NA Hardtop. he blew the original engine (which had alot of miles on it anyways) and swapped in a turbo engine. now hes blown up the turbo engine and rebuilding it to run 9s. or somthing.

:lol

AVNGinger 08-11-2004 05:01 PM

so he went from a NA, to a TURBO and now he is a NE (no engine) jeeze ryan!


All times are GMT -8. The time now is 05:20 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net