REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Island Off-Topic (https://www.revscene.net/forums/island-off-topic_147/)
-   -   Toyota supra chat thread (https://www.revscene.net/forums/39394-toyota-supra-chat-thread.html)

Enraged 08-20-2004 10:51 AM

you know what guy selling the wrecked supra?

ness_71 08-20-2004 12:00 PM

Quote:

Originally posted by Enraged
you know what guy selling the wrecked supra?
I think he was refering to Bob selling his car again. But it is nashman, and I could be wrong. :p

islandsupra 08-20-2004 03:21 PM

haha, that's what I was thinking too.

Anyways, this guy just called me. He's gonna be around tonight but gone on the weekend.
He already offered the guy that did the engine for him to buy the car. But if I want it for 1600 then I cna have it.


If someone can check it out for me tonight, and everything is ok then I'm going to buy it. I am done work on wednesday and can be down there thursday night of friday morning hopefully to pay the dude.
It's going to kick ass if this all works out, I might actually get to drive my car again!

NashMan 08-20-2004 05:06 PM

Quote:

Originally posted by islandsupra
haha, that's what I was thinking too.

Anyways, this guy just called me. He's gonna be around tonight but gone on the weekend.
He already offered the guy that did the engine for him to buy the car. But if I want it for 1600 then I cna have it.


If someone can check it out for me tonight, and everything is ok then I'm going to buy it. I am done work on wednesday and can be down there thursday night of friday morning hopefully to pay the dude.
It's going to kick ass if this all works out, I might actually get to drive my car again!

lucky it's gpoingto be aweil for mine we will race to see whos cars runs again i think i will loose thou

Enraged 08-20-2004 05:27 PM

whats the number and where is he located?

islandsupra 08-20-2004 06:39 PM

ahaha, ryan... when I spend all my money and all is said and done it'll still be stock :(

Anyways, by the time yours is done mine will probably be broken again, lol.
car is getting checked out right now, hopefully everything is ok. The guy said a lot of the plumbing is shot, the rad and IC is gone, but the fan looks ok, and it doesn't even look like the belts were touched. Hopefully the engine itself is ok, and didn't take a lot of shock damage or anything.
The anticipation is killing me. It's unbelieveable how much I just want my car back. Either I want to never see it again, or I want it back.

islandsupra 08-20-2004 10:17 PM

whoops, my bad. Race to see who's car is fixed first. well, I am not fixing it really, so I can't race.
If I did it, it would take ages!

Paradox 08-21-2004 12:43 AM

mine runs, always has..... you guys have to get your shit together :p

NashMan 08-21-2004 09:05 AM

Quote:

Originally posted by Paradox
mine runs, always has..... you guys have to get your shit together :p
i just can't weight tell yous breaks or you mod it again then you will feel teh same way i do

NashMan 08-21-2004 11:29 AM

humm josh might buy my brakes so may get new ones yae but we will see

Enraged 08-21-2004 03:07 PM

my car could be on the road in a week, only thing preventing it is $$... and stupid shipping....

Slate 85GTS 08-21-2004 06:51 PM

Ryan i want your hardpipes if i decide to keep the car. F*cking cars, i can never make up my mind what to do. Its a money pig, but i love it. But yeah sell me your hardpipes for cheap.

NashMan 08-21-2004 07:15 PM

Quote:

Originally posted by Slate 85GTS
Ryan i want your hardpipes if i decide to keep the car. F*cking cars, i can never make up my mind what to do. Its a money pig, but i love it. But yeah sell me your hardpipes for cheap.
i think i cna do that since there all going to be diffent this time around what parts of my piping do you want

NashMan 08-21-2004 07:16 PM

hey toby i still don't know if i wan run trd springs or comp cams

can you give me that part number again i forgot to right it down

NashMan 08-21-2004 07:18 PM

well i have some ideas but don't know if i shoudl do em i have finshed my battie box but what to use for lid

stainless or just carpet over it to match the rest of my floor


all so do you think it whould be kidna funny for me ot monte my fule persure gauge ont he hood of my car

i can run it insaid but that whoudl be fuel line goign into my car so i may not do that or just fuck the fule persure gauge

Enraged 08-22-2004 12:29 AM

7m valve springs (thanks to aljordan on SF): "Found the number. Its a comp cams part number 975. Retail prices look to be about $60 for 24 springs. "

as for your battery box, for it to be legal for most racing bodies it has to be sealed from the passenger compartment, and vented to the outside. if you dont have it covered already, use some polished stainless to make it look nice. did you just use steel sheeting to make the box?

reuben/bob: how did the car look? engine look good? reuben, if you buy that car, how much do you want for your current engine (just the head and shortblock, no manifolds or anything)? id like to have a second one to build over the winter/spring.

islandsupra 08-22-2004 01:19 AM

the car is mine :) not too sure what exactly it is engine wise... but it's better than what I have now I guess. Made a deposit on it, and have to pay the rest when I can get down there, and pick it up.
Kind of want to wait for him to find the paperwork for the rebuild though.... though it doesn't matter because it's better than nothing would just be nie to know exactly what I am looking at engine wise.

NashMan 08-22-2004 10:09 AM

Quote:

Originally posted by islandsupra
the car is mine :) not too sure what exactly it is engine wise... but it's better than what I have now I guess. Made a deposit on it, and have to pay the rest when I can get down there, and pick it up.
Kind of want to wait for him to find the paperwork for the rebuild though.... though it doesn't matter because it's better than nothing would just be nie to know exactly what I am looking at engine wise.



oh you got that car as int eh blue one that was smashed formt eh front end


that sucker got hit hard man i have cheaked it out and said no to the eninge cause the rad suport is tuching the hormonice blancer so the enigne wash pushed a bit


so i did not want to take any chance so i rebuilt mine instead

and i belaves the only thign that was done to it was hg job cause there show no singh fo the block being tuched or nothign

Paradox 08-22-2004 04:36 PM

Quote:

Originally posted by Slate 85GTS
Ryan i want your hardpipes if i decide to keep the car. F*cking cars, i can never make up my mind what to do. Its a money pig, but i love it. But yeah sell me your hardpipes for cheap.
i still want my defcon pipe back eventually.. even tho you bastardized it :p

NashMan 08-22-2004 05:26 PM

well i told you to come get it but you never do it will fit you car now well at lest should you do have that spacer and stuff but drop over and we can put it in and crap

AVNGinger 08-22-2004 07:43 PM

ok, question of the hour, to take off the crankshaft pulley, you need the Special Service Tool as seen here in step 11.

So, suggestions oh supra-wise ones.

Enraged 08-22-2004 10:06 PM

block the crank from turning, use a breaker bar to get the bolt off... good luck, its something like 180 ft-lbs haha

Slate 85GTS 08-22-2004 10:18 PM

Quote:

Originally posted by Supra-Kid
ok, question of the hour, to take off the crankshaft pulley, you need the Special Service Tool as seen here in step 11.

So, suggestions oh supra-wise ones.

Its not that big of a deal, just put your longest half inch drive breaker bar on it and make sure your ebrake is on with the car in 5th gear. It will turn a bit when you crank on it but once the slack in the ebrake cables and tranny are taken up it should crack free. Dont be scared to reef on it just make sure the socket stays on the bolt nice and straight so it doesnt slip off and strip it thats all. And if you cant get good leverage on the breaker bar then you can always use a pipe on the end of it haha, but make sure you are using half inch drive otherwise you will break your tools.

NashMan 08-23-2004 07:36 PM

the key tp every thgi is levage get big pipe and she will come off

the key to gettign bolts off is never use all you muscle and just mus it off use shape wack wiht you hand or just rife on ti for sec she will come off it peac of cake afrter that use pully puller then you are set

islandsupra 08-24-2004 12:57 AM

just think of a hammer. You don't drive nails in by putting the hammer on it and pushing. you whack it. Use the same techniqur to break the bolt free. Just make sure you have good enough tool sthat they won;t break when applying the "yanking" force to them.
Oh yeah, and when I was trying to turn my engine over, I was hanigng of the crank pulley bolt and yanking... and I weigh 240 ++ lb. So that bastard might be a little bit difficult to remove.
That took me 20 minutes to type with no errors. so I hope that it helps you!


All times are GMT -8. The time now is 10:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net