![]() | |
how much would you sell it for if you dont keep it? |
ive got meguirs aluminum polish, ill see how it does. i bought it for US$80. i was fuckin pissed off, now i dont know what im going to do with it... gotta talk to a freind of mine from school, he just got a TIG. murray, if i can put together a cheap catch can and get him to weld it, would you want one too? |
how cheap? i got my tranny flushed and fluid changed today, then got them to move the tranny cooler... the bastards put it right infront of my oil cooler! arggh.. they pulled off the oil pan and couldnt find any premature wear tho. |
i dunno, ill check it out. hopefully around $40, but ill have to talk to him and work out material costs. |
yeah im prolly in for that, if it is indeed $40 |
Quote:
|
i got cool neat idea hwo to improve my spark but 10 fold int eh supr awheil still useing a plat plug will otu do copper any day fo the week my bro gave me the idea and in capstier in the main lead so you will get full power thought otu the wire wiht now restance what so ever |
hey i foidn a company that makes them too i think my bro will just mod my ngk wires instead of buying new ones that have it int he wire it self here si the comany that makes the same thing that my bro might make for me and mabye for other peoepl as well if there money involded http://www.nology.com/hotwork.html |
murray - unless he charges me a shitload for welding, the can will be $40. i just picked up all the supplies today. dimensions are 3" round x 6" tall, with brass 3/8" hose barbs and a 1/4" NPT drain valve on the bottom. any preference on placement of the hose barbs? i was going to place them 90 degrees apart at the top of the cylinder. |
hey muray you have not up dated the wedb site yet as in adding in chad ect |
i think i broke the rx7 it make some funyn as noci3es but i think it is the rear brake drum but not sur ei will find out after i do some test s |
well the swap is done the car now has an lsd and rear disc brakes umm i thining this car will turn in anotehr project or some thing the way it is goiing and i have greater truq now cause of the rear end as well bu the down side is i have no e brake no more caus ie need ot buy cable and i umm i am cheep so i wonte bother plsu e brakes are for ff peoepl but the swap is pretty sright forword you have to get the main brake line and swap teh diff cup and that si abotut i since the drive shafts are tinny bit diffetn diffent bolt patten |
what, is this the rx7 thread? NO! talk about supras damnit! haha |
meh supra not done so blaaaa but eh rx7 wil be fune when ti is done i know it will be lsd will amke a ton of fun out of it just got fix the cluthc now hey i got 550 bucsk to spedn on some thing i was thinking cam gears but i don't knwo yet or i cna get nice wet kit hummmmmm |
wideband o2 |
aluminum.... wing. Was gonna say driveshaft, but I think you alraedy have one. So go for the wing. You know you wanna ;) |
i only liek really 3 wings aumle drag wing very smaal in size that my lest fav caus ei need pretty car for it wale tail 89 wing |
wide band is an idea but 500 is just not eghough for good wide band i was thinking cam gears since i have diffetn cams i might belabe to get mroe power out of my car or hks pillow montes that whoudl be sweet it whoudl so finsh my spetion well i gong to look at toys to buy it kidna hard now sinc ei have some much stuff now and junk it harder to upgrade bloody car :D |
lol... I was joking about the wing! Cam gears are an idea. What about traction bars? Or even adjustable toe/camber bars if you are going to drop the supra even lower. There's a place that makes both.. solid bars with heim joints. Would be awesome addition to suspension if you haven't already gotten something made up. |
uh... $500 not enough? http://www.innovatemotorsports.com/products/lm1.php US$349 for it, or US$429 with the stuff to datalog... |
meh don't need it right now but i really am thinking fo gettign hls pillow ball monte thous that whould finsh my spetion quite well |
brainstorming ideas... i need a project for school, something not easy... im considering a paddle-shift system for a 5spd supra... maybe suspension... keep in mind, this is all fabricated/designed/built by me (aside from maybe a laptop to control things)... |
murray - catch cans getting welded together on monday or tuesday, ill send you a pic when i get them back. |
probably not much difficulty (in design at least) but a nice tubular exhaust manifold would be sweet! ;) I dunno, a paddle shift would be cool - they are tons of fun! can't really think of anything else off the top of my head. |
well the sub frames are out now my car is pretty dame light now since i can lift the front end off the jack stands oh now i got some work to do now traiing amrs are next i think i might do atube over type thing to keep it simple butt he hime joints got my eye |
All times are GMT -8. The time now is 09:38 PM. | |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net