i am gues it past 2 a long time ago maybe 250 or tad higher


eaxhuast leaks are easy to find just take oyu had block you muffler if it stalls no leak if she still keep a going bang you got leak if there is no change in ideal then you got big big leak


most of the time it the catback gasket or manfold gasket or in man is where the manfold bolts up you loose bolt alot


i still need new body but i 7000 in the hole and hoigh milage cars are not the great car to give hp they will spin bearing and al the other crap that is if it really high milage plus the turbo may be like just about dead



why tht ehell do you wan to sell you toy any way

about the website, how about "Van Isle Supras"?

ok this is what we got so far


1 Van Iland Supra's
2 Van Iland Supra'Z
3 Van Ilse Supra's
4 Van Iland Supra Association




now vote whch you liek the best i like 4

well i going to nanimo today to pic up some brakes and chat whiht silver mrk 3 and hang whiht some friend's


ps i painted the rear quter fender on my car humm look bright caue sit is new paint heheheh but it will look better once it get dirty just like the rest of my neat shit moblie

http://www.realityexit.org/VIS

this's a start...

(i can change the name later)

Gah!

Museum light came on last night when I got home after the trip... I topped up the coolant resevoir and it went away.

This morning I can hear the waterfall when I rev...

I'm gonna burp the coolant system tonight and then say a few prayers.

Haven't even had the car 24 hours!

mine does that too sometimes, its quite often for it to come on in hard corners... hope it isnt a BHG tho, that'd suck :(

well in hard conner is it just slosh aroudn


any way it summer so you will have to fill it as it will avaporate

i get the museum light once in awhile, usually no more than once every two months or so, but i think i have a small leak somewhere. i get the waterfall once in awhile too, but i've been told that it might be the exhaust gas recirculation thing coming on, because it comes on to help heat up the engine.

does it have a MHG? if so, check the torque on the bolts, they should be at least 70 ft-lbs. if its the stock gasket, torque it to 70 or 72 ft-lbs in 10 ft/lbs increments (ie stock 52, then 62, then 72).

whoops, posted this in the wrong thread hehe

btw murray, the page looks sweet! you guys up for the drive next thursday to the autox? if so, lets stop at that rest stop at the top of the malahat, that would be a perfect place for pics.

murray, have you done any polishing? i want to know what i would need to polish my wheels. i was told to use marine paint stripper, and that would get 90% of the paint off, then polish it to a mirror finish.

im bored, so im posting again :)

what do you guys think about getting some color-matched paint for my car, and painting the moldings around the body? check out my 1.5 min photoshop job hehe

moldings look kinda coo dude

ive done some polishing, not really tho.. just used a polishing bit on a drill.. its a pain in the ass to do, even if the parts are off the car, i have some polishing compound too

it'd take alotta work to get some stuff to like a mirror finish.. check out
http://www.rx7turboturbo.com/robrobinette/polish.htm

SilverMk3 do you want to help with this site a bit?

and i still need your info NashMan and SilverMK3, or anyone else with a supra who wants to have a pic and info added.. check the page and email me :)
http://www.realityexit.org/VIS/

well i am in naniom or what ever it spelt like any way now to drive to silver mrk3's house any way i will post to tell him i going there

weird! I just refreshed and saw Nashman's post!

Hey Paradox, yeah I'll help on the site, what do u want me to do? It looks pretty damned good as it is! We need more content tho - just dunno what. I'll send u my info tho.

cool... yeah i was thinking more content too, i'll leave that up to you guys :)

can you do pearl/CGI or javascript? im a lil rusty at javascript but whatever isnt covered in 'the javascript bible' isnt covered at all.

just let me know what you're good at, macromedia? graphics? etc..

anything would help out lots

too bad i have no digicam, i could have done a how-to install a K&N FIPK, including how to break a bolt, how to go "whats this fuckin bracket for?" and how to tear open your almost healed 2nd (or is it 3rd?) degree burn!

K&N FIPK.... i LOVE the sound when you floor it hehe, id say another 5-10 hp, according to my butt-dyno.

you got to be kidding my toby your but dyno i whoud ahve to say your ear dyno in less you had a stock paper filter that you chould not see thou and stuff


is it the real filter kit or the one you where thinking on fabbing in and such


any who thanks dave for the rotor's and stuff helps me out alot sorry for breaking your ratchit and plumber wreak it stuck open ehehehe i replace it if you want me tooo


i was thinking cuttiing my box open but i don't know it it will really do any thing case eninge heat is bad eh


so you dave wants turbo now ehehe i took em for boot in my car ehehe i didn't push it that much but he had fun far as i know of



but his car is in very good condition his eninge bay is super clean and looks like 90 based na motor but i am not serton thou
i got pic's of our cars and such but we got to plan supra meet that dave can make it to we will leav it up to him when he has the time and such lucky fool he gets to watch movies for freee and gets paid to do it tooo


any way i going to try to have fun down here and drink beer 1 a beer ehhehe i can drink all night i not going to work caue si kinda tweaked my shoulder when i was driven and was painful to switch gears


so i will post the pics soon mury and send em to u on icq

its the FIPK. bought it for US$75, good deal since its US$130 new. they guy i bought it from oiled it up real nice, so oily in fact, it got all over the box hehe.

still havent figured out what that bracket is for.... but i DID notice an increase in power. not alot, but a bit... now im just wondering why my temp sensor isnt working now...

how you liking the "wooosh" sound when u give it gas? took me awhile to get used to, but it seems cool now... ehhe

ps - i ordered that new K&N heatshield from suprasport with the money that was supposed to be for my POD.

the heat shield is originally off some sort of suburu i think, it looks pretty cool

shield

groovy.... i was goin to use a stainless steel bucket lol

no, im actually going to make a heat sheild out of aluminum i think.... then ill post plans on supraforums...

Nashman, thanks for the visit. Sorry I was gone half the time but I was capturing some video to my computer off of a camera for work, that's why that girl was there. Don't worry about the ratchet and shit, its no biggie.

I hope those brakes work out for you, they were fine when I had them. Lol, u were working your brakes pretty hard with your driving considering they need to be replaced... ;)
Damn my little NA feels heavy and slow now.

Paradox, for the web stuff I can do lots with JavaScript, I know a bit of PHP but not any CGI/Perl, and I can do a little bit with Flash (not much). I don't really have any ideas for content right now, but I'm working on it! I like your design, so I'm trying to figure out what I can add to it.

Hey Enraged, I would either keep the mouldings, or shave them off completely. Here's a quick photochop of what you'd look like:
I think It'd be sweet. (Gunmetal rims too)

i might paint my rims black just got t find time and see if it will look good and such i don't know i will post pic of my car and paint wheels black and see what it looks like still in nanimo but my sholder still hurt's i choud not drive to vic it hard to drive stick whiht hurt shoulder

you know how much work is involved in shaving the moldings? hehe i think ill just paint them. as for the wheels, i want to strip them and polish them. its a cheap alternative until i can get some rims.

well, im headin to parksville today, so ill talk to you guys on sunday or so.... minigolf here i come!

mini golf


any way toby read this i posted on and ther tpic in this form

ps toby i know alot about exhuast to much free flow will hurt and stall turbo motor sure on full boos tit is fine but when greaing down and such basicl runing whiht out boost and deecell you will some time stall out



to big of pipe and you go slower to small and you resritck itit



bascily try this blow thogh you mouth and then opn it up more as your moth gets bigger it hurt to blow out more air



ps big car crash on the highway when i was comeing home weight for like 1 hour or more