![]() | |
w00t once again my car didnt start.... my starter must be shot because this is happening pretty often now. |
does it just like.. do nothing. no clicks or anything? cuz thats what was happening to mine. first i bypassed my starter relay to see if it was that.. but once that checked out fine, i just bought a new starter and havent had any problems since :) |
i am ignoring the supra right now dame rx7 igntion system i hate reading but it is the only way to get shit to work esliy if you don't knwo what car this einge came out fo |
Quote:
|
sounds like what mine was doing. i like my bosche one :) it was... 150 bux but i got a discount and such.. but i think its usually around.. 175 from lordco... |
well i went back and it started up first try. I dont know whats going on! |
yae just get new starter or take your out and pull it apart and give it good clean on teh amtrue and such and clean thed contacks and if so replace the brushed and such or buy new starter |
yeah... im leaning towards buying a new starter.. seems like less work |
sounds excately like what mine was doing. on a side note... my dump tube on my divorced downpipe fell off while driving tonight.. definately a VERY scary experience :D:D |
lol that is some funny shit thou dadadadadadadadad eeeep is that rod nock ting ting ting no that was my poor pissy welded exhaust |
lol i emailed the guy and hes all THOSE WELDS ARE PERFECTLY FINE. yea.. seeing how it completly fell off. and there are carbon marks all over the downpipe from where it has been leaking... nice welds... |
your kidding right thous are perft welds i sean julie make beter welds and lets face it she can't weld worth shit |
lolk i know! I CAN WELD BETTER THEN HIM and thats really saying something... |
who made it? |
some dork wad in toronto.. just got my car back from Ryan's shop :) sounds soo much better now. its hitting .86 at 4000 rpm in 2nd though... so i think im going to have to back the boost down again... |
Quote:
|
his name is Mark P <mk3spoolint78@yahoo.com> the welds were horrible.. when the downpipe was off i was actually able ot just take the flange and push it off with one finger.. just brutal.. |
Quote:
Oh, his last name's Rai just so you know, not P or whatever :p |
hm weird.. oh well.. i dont have anything against him.. just the welds were sooo bad... just angry that i had to spend another 100 bux on it to make it seal nice. |
Quote:
Although 100 bucks out here would get you another entire downpipe, jeez... :p |
yea well i asked him if he would give compensation after i told him how it fell off in mid drive and such, but he said that wouldnt be an option so i just didnt bother taking the time to take pics and such over somethign taht wouldnt do any justice... |
im positive Ryan will give some insight whenever he comes on.. he had to go through it all :) |
Quote:
|
yea most definately seems liek that kind of person.. hes saying taht since it was 4 months ago. even though after i got it i told him there were leaks. that he wouldnt do antyhing. and still says that the welds were fine... |
welll that dp was such a heep of shit i had ot re weld the hole dame thing who ever welded the dp did such a bad job it was not even funny i have never sean such shit in my life and i ahve sean bubble gum holding on ground for peoeple stero in there cars the only thing that was good was the cut in the the pipe and 2 inc dump tube i use 1 3/4 max for up graded turbo's 1 1/2 for reg ct26 and the flage was cut bad so it made the dump tube to close to the bolt hole that you chould not put a nut on you can do bolt now just barly thou oh well heep of shit but now it ok and doe snot leak |
All times are GMT -8. The time now is 06:04 PM. | |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net