|
im diggin the bomex sides and rear, but i want to do my own custom front end (well, modified stock). Duane at carbonfibrefx.com is making the turboA duct and possibly a front lip, im considering the turboA duct when i paint my car, possibly molded in... i just dont think the ab flug suits the car... id prefer one-off custom metal fender flares... i just found out how to do them too |
sweet kent might get me the center force dd for like 400 bucks if that is true an every thign i going center force can beat that price |
bah! centerforce sucks! do some research! |
anythings gonna beat the stocker. specially a old slippin' one ;) |
if you do some research, centerforce isnt better than stock.... the stock can hold around 300 rwhp easy, centerforce can barely hold stock power (200ish rwhp).... why waste money on a crappy clutch that you will have to replace in 6 months? just like those kumhos ryan, you get what you pay for.... |
whats the price on another stocker? if moneys tight, maybe just getting another stocker would work out for ya. altho from what ive heard the stock clutch heats up really good, so if you were racing, it would start slippin' alot sooner than a aftermarket id still say try the Spec clutch if you can afford it... no ones had anything bad to say about it |
ok i gona say this again the reson why poeple say that center froce clutches suck it cause they don't break em in proprly if you don't they will slip and burn out if you do it right then you fine there no fun to break it in you know you can't ever really drive on the road for frist littel bit cause it go stop go stop go stop go stop power go power go stop very freaking crazy an anoting you don't do this it will not seat and will bunr ti self out in mater of time and that applies ot all cars that use the df clutch even look on there web page they big warring about break in pired huge waoriring and the kumose did there perpus in my cars life hat what you get when you get w rated tires but the belts going icky 400 is about the price of stocker |
tell that to the people who broke it in properly and it still didnt hold the power. why cheap out? its only another $300 or so to get that TRD or the SPEC 2... call the place that fuzebox mentioned, $750 something for the TRD, no waiting.. |
that is the one i want but if i don't have the money the i have to go other it all about money to power i still ruing worund whiht my head off trust me i will get clutch that will do good |
|
you got bugs all over you front bummper :D oooh i just oder my bro x mass gift hehehe i hope it get here in time i whould say it but some times comes to the rev scene form but i sweet gift that kinda cost me but eh it my bro i told him i want some thig for my car to make it go faster so i hope he don't get me a car air freshner |
good pic, but ya, get rid of those bugs... hey murray, found out it would be pretty cheap to add pearl to your car. as long as there is no bodywork involved (dents, etc) you could just wetsand your current paintjob, have it sprayed with pearl, and a few coats of clear. total cost in material would be around $200-300, plus payin someone to spray it. something to think about for the car shows next year... at the moment, im thinking a very dark silver, possibly with white and blue pearl for my car... |
me my self don't liek clear coats much |
base/clear is by far the best way to paint a vehicle. singlestage (one solid color, no clear) is ok for a cheaper paintjob, but every time you try to detail it (cutpolish/buff) it takes away some paint, and over time you get closer and closer to metal. with base/clear, the majority of scratches can be buffed out of the clear, never touching the color, and you can always add layers of clear down the road. i just got an email back from House of Kolor, they suggest "Shimrin Black Pearls" that appear black and other colors depending on the light, so ill check those out sometime this week. |
i just like flat caus eit can be restored liek new any teim you wash it and you can make the thing look brand new but clear coats do have the durbulty as you said if i ever paint my car i goigt o put some bule perl in mine to make it look super white hehehe my friedn had it done to his car and boy was it white |
Paradox make your car like this:D clear turn signals, bodykits, rims, etc...:) BTW, your car look nice though... http://www.kaizousha.com/gazou/kbsp70104/a1.jpg http://www.kaizousha.com/gazou/kbsp70104/a2.jpg http://www.kaizousha.com/gazou/kbsp70104/a3.jpg http://www.kaizousha.com/gazou/kbsp70104/b4.jpg or red supra with bodykit http://www.kaizousha.com/gazou/kbsp7062/a1.jpg http://www.kaizousha.com/gazou/kbsp7062/a2.jpg http://www.kaizousha.com/gazou/kbsp7062/a3.jpg |
my review: white supra: double decker wing looks like crap, stock is better, clear signals look hacked, you can buy premade ones that look decent, and murrays rims are better (just not wide enough hehe), i like the darkened tails on it though. red supra: kit looks good accept for the sideskirts, and the wing is fugly. forward facing scoop is POINTLESS,just creats drag, it should be facing rear. and the wheels look the same as the white ones.... oh ya, and wtf? square foglights in ROUND holes?? and i already tried to convince murray to get a lip, but hes afraid of scraping, which is very possible with his H&Rs. this is what im goin for with mine, clean and simple: http://www.overboost.com/pix.asp?ima...l/DSCN7175.jpg |
bahahah look at my xmas avatar! |
Quote:
I think he should paint that factory front lip though... |
ya murray = paradox toby = me ryan = nashman |
I really like both of those. I'm not in a picky mood though. That red paint job is nice!!! Hey Timpo, where do youget your pics from all the time???? |
Just put in my new eBay cone filter :p It only cost me $15 US! Anyway, how's everyone doing? I've been away from this thread for way to long - it took me like an hour to go through all the posts since last time I posted! Your sub box looks sweet Toby, maybe I can get you to help me make that fibreglass headlight enclosure once I have enough cash to order those projectors. First things first tho, Ryan I need to get that CV joint off you - mine sounds like shit and is starting to pull. Here's a pic of the leaky boot, I guess all the grease is gone cuz its grinding bad :( http://www.entreri.net/forums/leakyAxleBoot.jpg Also, I need a new muffler, mine's got a death rattle whenever I give it gas. I was thinking of getting this one: http://www.entreri.net/forums/dualMedallion.jpg Or an N1 style muffler from Midas. I need something under $200. Any ideas? Timpo: That red car is the Do-Luck kit, who makes the white one tho? It looks like the bomex side skirts, but I've never seen that rear skirt or the lip spoiler. |
Oh yeah, I was thinking of coming up to Vic sometime within the next few days. Is anyone up for a VIS mini-meet?!! |
yae man ther meet happening liek on friday you wana coem and plus we are going to be have supra meet after the nes year you intrested friday meet i will be at timmhorton at 10 pm pm for driction ect or i will meet you or some thing or we can all meet then go tot eh mini meet who's intrested |
as for muffler humm ther so many to pic from ti not funny midas has raven muffler there good and there about 125 i can get em for or some thing and if you want sweet exhuast i can hook you up whiht great deal and it will last longer then you car as well as for the cv joints i will give em a look at one is trased so it goner but i will look at the other add me to msn or icq msn rdemetrioff@hotmail.com icq 46638419 sorry i have bean busy abotue h cv joint but i have bean throw alot latly cause my mom passed and lot of other stuff i sorry ps the muffler you listed about are for turbos or just wates of money if you want permo sound and good loo the n1 can of apexi 2.25 is the best waty but cost money for get how much but i think i can get you deal still will be over 200 thou |
| All times are GMT -8. The time now is 06:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net