FS/FT: 2000 Acura Integra Type R FULLY BUILT- Championship White
 

Its time for me to cut my losses and sell my car and move onto bigger and better things :)

I'm selling my 2000 Integra Type R with 154,XXXkm on the Chassis 4x,xxxkm on the JDM B20. The built motor is currently out of the car and sitting in my garage waiting for a new crank and rods.

The car's aircare is currently expired, however a pass is very easy. The car has been sitting/storage since Sept 30/08

Engine Specifications (Built B18c5)
Portflow Ported and Polished Head
-Head was purchased from MooMan in 2006
Rocket Motorsports AEBS Intake Manifold
Rocket Motorsports M22x Camshafts
Rocket Motorsports Titanium Gen2 retainers
Toda Racing Dual Valvesprings
Hytech Replica header 2.5" Collector
J's Racing Intake
AEBS Headstuds
Benson Machine Sleeved 85mm block (Darton Sleeves and VIN matching block)
Manley Lite 87.2mm Connecting Rods
OEM ITR Crank (may need to be replaced)
CP X-Forged Pistons 85mm 12.5:1 compression - CP part# SC7123x
Koyo Racing Dual Core fullsize radiator
RC440cc Fuel Injectors
B&M Fuel Pressure Guage
B&M Fuel Pressure regulator
Golden Eagle Oil Sandwich
Hondata S200 with ECU (tuned by Garage5)
BuddyClub Spec 2 Exhaust
Custom Testpipe
Engine made 223whp and 163ft/tq before it spun bearing

Engine Specifications (JDM B20)
Purchased from JK auto on Mitchell Island in July 08
Approximately 4x,xxxKM
Does not burn oil, runs like a stock engine would
very strong motor
6700rpm fuel cut currently

Transmission
OEM USDM ITR Transmission
Clutchmasters 7lb Aluminum Flywheel
Exedy Stage 1 Organic full face clutch
Skunk2 Short Shifter
Spoon Sports Shift Knob

Suspension/Brakes
Spoon N1 Coilovers (Front-14K Swift Springs, Rear 12K Spoon Springs)
Spare pair 20k Spoon Springs
Function7 rear Lower control arms
Function7 rear endlinks converted for use with OEM ITR sway bar
Beaks Rear Tie Bar
Alex Racing front strut bar
Cobalt GTS autox/street pads
Brembo Crossdrilled and Slotted Rotors
JDM ITR 16" rims with Yokohama Prada Tires

Interior/Exterior
Momo DC/EG Steering Wheel adapter/hub
Momo Tuner Steering Wheel
Alpine 9835 Headunit
Defi D-gauge Oil Pressure
Defi D-gauge Oil Temperature
SRR Blue 4 Point Harness
JDM Airbag delete
Mugen Power Manual Pedals
JDM ITR Sidemarkers


The bad
The car was rolled over, but not written off. so the title is CLEAR. the roof skin and A-pillars, doors were replaced.
the car has some dings here and there and was keyed.





PRICE
$14,500 AS IS
$18,000 with Spare engine
I will not be parting out the car as I want to see it go as a whole to someone else who can enjoy it like I would.
I will entertain trades that involve a minimum of $10k (cars that i would be interested in would be EM1 civic SiR)


http://i301.photobucket.com/albums/n.../IMG_1458b.jpg
http://i301.photobucket.com/albums/n.../IMG_1462b.jpg
http://i301.photobucket.com/albums/n.../IMG_1461b.jpg
http://i301.photobucket.com/albums/n...R/IMG_1528.jpg
http://i301.photobucket.com/albums/n...R/IMG_1518.jpg

Damn!, where was this last month when I was looking for another car

;) ;) ;) ;) ;) ;)

bump for a slow car :D hahaha

:thumbsup:

Updated first post
bump for a perfect project car

:thumbsup:

ttt

bump for this car !!!
its a good car!!

if you ever going to part out, let me know
thanks

clean car bump for you

Why is there so much gap between your hood, bumpers, and fenders?

the reason why it looks like there is a huge gap is due to the angle of the picture. :)

ttt

So just so I unerstand correctly, the buyer has to fix and reinstall the engine?

Are the tail lights from an earlier year? Aren't the rear turn sigs supposed to be red?

Nice car!! :thumbsup:

I have an EM1 for sale..let's talk.

The car already is running with a JDM B20b engine in it
the built block can be purchased along with the car, but the buyer will have to repair at his choice and have it reinstalled.

The taillights are from a 1997 Type R. I swapped them over to have all matching turn signals, (Front, Rear, sidemarkers), and Yes 98-2001 Type R's are supposed to have all red tail lights

ttt

Bump for a one of the Monster ITR's in vancouver

bump for a SEXY ITR! ! ! !

just wondering..do u have the stock exhaust lying around for aircare?
bump for an ITR fellow

no stock exhaust, just the muffler itself

can u pass aircare with the test pipe?

nope, my car has cat that has been hollowed out, so that will pass the visual test.
Aircare wont put the car through the sniffer because its a 2000 OBD2 vehicle, so all they'll do is scan the ecu. all you have to do is plug in a 2000 integra ECU and it'll pass

Bump!

:thumbsup::thumbsup:

ttt

ttt