Up for sale is a 10" rockford fosgate sub without box
only include sub and trim ring
(no screws, original box , etc.)
$40 firm
cosmetic damage -
PICS
--------------------
*****specs from rockfordfosgate.com**
Custom 10-AWG nickel plated push terminals
High density poly-foam surround
High-temp voice coil with spun-laced Nomex® re-inforcement collar
Linear spider with embedded 16 AWG tinsel leads
Parabolic injection molded ABS/Acrylic dustcap
Protective PVC textured magnet cover
Reversable ABS trim ring
Thermoformed polypropylene cone
Impedance 4-Ohm
Power Handling 150 Watts RMS
300 Watts Max
Voice Coil Diameter 1.5" 6-Layer
(3.81 cm)
Motor Size 40 oz.
Speaker Connector Dual 10 AWG compression
Fs (Hz) 30
Re (Ohms) 3.40
Le (mH) 3.6
Qms 8.30
Qes 0.56
Qts 0.52
Vas (Liters) 43.7
Sd (cm2) 360
SPL (1w/1m) 84 dB
Xmax (mm) 9.0
Woofer Displacement 0.043 cu. ft.
(1.22 Liters)
Cutout Diameter 9.25 in.
(23.50 cm)
Mounting Depth 5.125 in.
(13.02 cm)
Shipping Weight 11.10 Lbs.
(5.03 Kg.)
Rec. Sealed Enclosure 0.59 cu. ft. (16.42 liters)
Range: 0.50 cu. ft. - 0.85 cu. ft.
Range: (14.16 liters - 24.07 liters)
Rec. Vented Enclosure 1.40 cu. ft. (39.64 liters)
Vented Tuning Frequency 37 Hz
Port: (1) 3" diam. x 8" long
Port: (1) 7.62 cm x 20.32 cm
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
