You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
If you have any problems with the registration process or your account login, please contact contact us.
so i was at home depot, i found some of the liner. it looks better in the pictures than in person. i was expected something that looked closer to a hard plastic/rubber. this is just super soft foam that looks like pipe insulation. i will be using some under the lip to provide some scrape protection, but i won't be making the lip.
so i was at home depot, i found some of the liner. it looks better in the pictures than in person. i was expected something that looked closer to a hard plastic/rubber. this is just super soft foam that looks like pipe insulation. i will be using some under the lip to provide some scrape protection, but i won't be making the lip.
thats what I was thinking
want to check these out in person before i home depot anything
__________________
Spoiler!
Quote:
Originally Posted by Culture_Vulture
My girlfriend's next period should be any day now, maybe I can drug her into letting me near her vagina. Apparently Nyquil fucks her up really good.
Quote:
Originally Posted by AsNoobAsItGets
I'm capable of many many many things. You may see me as a some guy on the internet but you don't know the half of it. I don't talk tough just for sh*ts & giggles but I do do tough things, bet my life on that!!
LOL that's so redneck
Whats next garden edging on your wheel wells for DIY wide body.
Wait till it comes off and gets sucked up into your pulleys or cv shafts.
Even OEM plastic lips will do this. I ripped a GTX lip spoiler off one of my Jettas while rolling over a gigantic speed bump and one of the corners got caught in the lower control arm, just half an inch away from the axle. The 3M tape mentioned earlier in this thread is just as strong as most of the plastic/rusted metal screws that the majority of manufacturers use to put on their lip spoilers.
^^ Reading that comment on Home Depot, A bunch of you guy are going to the Home Depot on Terminal, I went during lunch and there's only 2 packs left, one which somebody opened.
That being said, I'm wondering if this will hold @ hwy speeds or say when @ Mission Raceway for street legals
i go to surrey once a week and it holds up fine on the way there.
"It's called Sex Panther by Odeon. It's illegal in nine countries... Yep, it's made with bits of real panther, so you know it's good ... They've done studies, you know. 60% of the time it works, every time. "
Whats next garden edging on your wheel wells for DIY wide body.
Can't wait to see this one... maybe the kids who insist on sticking their wheels out the side of the car past the fenders can slap some of that shit on the wheel well edge to keep within the letter of the law
Maybe all the foam body kit ricers can have their own trophy at the RS Summer meet
__________________
Don't be the next RS.net statistic - If you drink, don't drive. You'll lose your licence, and the rest of us will laugh at you.
I tried to put this on my car.
Problem was my front bumper can't clear the driveway on it's way in/out. So I don't know how it's gonna clear this lip.
it's really pliable, it'll just bend to form with your bumper. you should make sure to use really good quality durable double sided tape if you do end up doing it though
The problem is, my driveway is slanted and I get about halfway out of my garage, then the bumper hits the pavement, hard. I've tried using blocks, and even built a mini ramp.
Shit's not happening. lol.
The "lip" will just rip off if I even bother to put this on. Or worse. Catch the pavement and rip off my bumper.
^ did you not read my post ? you get the tape at LORDCO, and the lip at Home Depot
Quote:
Originally Posted by jlenko
Can't wait to see this one... maybe the kids who insist on sticking their wheels out the side of the car past the fenders can slap some of that shit on the wheel well edge to keep within the letter of the law
Maybe all the foam body kit ricers can have their own trophy at the RS Summer meet
first off, you automatically lose any automotive argument due to your Cavalier and what you did to it.... don't give a shit if you still have it or not, point is you HAD it, and it was YOU who modded it the way it was......
to rice out a domestic, I still don't know if you got the biggest nuts on this forum, or the least sense... I don't know you personally so I can't make that judgment, and besides I don't do personal attacks on forums...
and secondly, I will be at the RS summer meet with my new wheels and setup, (fingers crossed they're completed on time) and I would like to invite you over to inspect it and check it out..... but the problem with that would be SINCE you had a fully riced out Cavalier, this shows you've got absolutely 0 taste in automotive styling, so your opinion is worth as much as a huge ricer wing on a 120hp FWD Cavalier. And we all know how much that really is....
you're more than welcome to still come by and check it out, someone needs to show you how proper automotive styling is really done
__________________ (oO:::\___/:::Oo) (DPE-wheels) // Satin Cocaine White
^ did you not read my post ? you get the tape at LORDCO, and the lip at Home Depot
first off, you automatically lose any automotive argument due to your Cavalier and what you did to it.... don't give a shit if you still have it or not, point is you HAD it, and it was YOU who modded it the way it was......
to rice out a domestic, I still don't know if you got the biggest nuts on this forum, or the least sense... I don't know you personally so I can't make that judgment, and besides I don't do personal attacks on forums...
and secondly, I will be at the RS summer meet with my new wheels and setup, (fingers crossed they're completed on time) and I would like to invite you over to inspect it and check it out..... but the problem with that would be SINCE you had a fully riced out Cavalier, this shows you've got absolutely 0 taste in automotive styling, so your opinion is worth as much as a huge ricer wing on a 120hp FWD Cavalier. And we all know how much that really is....
you're more than welcome to still come by and check it out, someone needs to show you how proper automotive styling is really done
will have to check this out
__________________
Spoiler!
Quote:
Originally Posted by Culture_Vulture
My girlfriend's next period should be any day now, maybe I can drug her into letting me near her vagina. Apparently Nyquil fucks her up really good.
Quote:
Originally Posted by AsNoobAsItGets
I'm capable of many many many things. You may see me as a some guy on the internet but you don't know the half of it. I don't talk tough just for sh*ts & giggles but I do do tough things, bet my life on that!!
Can't wait to see this one... maybe the kids who insist on sticking their wheels out the side of the car past the fenders can slap some of that shit on the wheel well edge to keep within the letter of the law
Maybe all the foam body kit ricers can have their own trophy at the RS Summer meet
Mine stick out 4-6 inches but I still don't stoop to such levels. Then again I'm one of those douche bag big truck drivers cracking windshields and blinding everybody with my 55 watt halogen lights but hell I'm a little inbread.
Maybe at the RS summer meet I'll get an RS trophy for Most lacking of foam tape inbread douche bag 2010.
I'm not holding my breath that would be one expensive engraving.
__________________ Rise Auto Salon
11938 95a Ave Delta
I can be reached VIA text @ 778-232-1465
Oil change special $70 5 liters synthetic oil including OEM filter Fender rolling from $45 per fender Car Audio:
Focal, Morel, Genesis, Clarion, Scosche, Escort, Compustar, GReddy, Blitz, Tomei, Motul, Endless, Defi, Cusco, Nismo + More
We specialize in:
Custom Car Audio
Race/4x4 Fabrication
Forced Induction
Engine Swaps
General Maintenance
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
