REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Vancouver Off-Topic / Current Events (https://www.revscene.net/forums/vancouver-off-topic-current-events_50/)
-   -   Official "Where can I buy this locally?" Thread (https://www.revscene.net/forums/627664-official-where-can-i-buy-locally-thread.html)

MG1 03-05-2012 05:58 PM

Quote:

Originally Posted by bonestock (Post 7819765)
I buy mine at T&T.
pack of 4 i think for 3 bucks?

pack of 4?


I get a pack of 40 at Fujiya for around 15 to 18 bucks.

The other place I mentioned, I'm pretty sure sell it for around 10 bucks.


BTW, I like my inari with no sushi vinegar in rice, slightly salted with kuro iri goma (toasted black sesame seeds).


UPDATE: Was just at Kim's Mart on Broadway near Fraser

40 pc inari kawa (skin) Made in Japan for $9.99.

http://www.yelp.ca/biz/kims-mart-vancouver

KingDeeCee 03-05-2012 07:54 PM

Quote:

Originally Posted by StylinRed (Post 7819602)
if you want a nice one check out Chairs | Restoration Hardware

their cheaper ones are about the same price as you would get elsewhere for a passable one

I'm not going to lie....they look sick as fuck. But then again...I assumed beanbag chairs went for no more than $200. $500 is a steep price to pay for a beanbag...

exdee 03-06-2012 08:01 AM

anyone know where i can find custom piggy banks? Pm me im not gonna check this forum often
Posted via RS Mobile

hungryRR 03-06-2012 09:34 AM

Quote:

Originally Posted by kcl38 (Post 7819520)
Kitchen clogs? Starting as a line cook and my sneakers give no grip and I'd rather not fall at work

I find some clogs dont offer that much grip either.

Payless and Marks Work Wearhouse carry all black work shoes with nonslip grips over oil/water .. fyi the soles are annoying to keep clean but its a small price to pay for vs slipping

MoBettah 03-07-2012 09:17 AM

Anyone know where i can buy glow in the dark sticky dots?

jplus 03-07-2012 05:30 PM

Anyone know where I can find those old IBM model M keyboards locally? Thanks.

http://upload.wikimedia.org/wikipedi.../57/ModelM.jpg

MG1 03-07-2012 06:25 PM

Quote:

Originally Posted by jplus (Post 7822447)
Anyone know where I can find those old IBM model M keyboards locally? Thanks.

http://upload.wikimedia.org/wikipedi.../57/ModelM.jpg

Free Geek in Vancouver.

http://freegeekvancouver.org/

Broseidon 03-08-2012 02:25 PM

Where can I get black trim tape? Couldn't find any at canadian tire

http://images.oreillyauto.com/parts/.../trm/t9005.jpg

Presto 03-08-2012 02:52 PM

http://ucables.com/img/ipics/AMP-RJ4...CA-R323061.jpg

Looking for some RJ45 connectors. I know NCIX has them, but they are special order. I want them cheap, as well. So, forget the big boxes.

jaebomb 03-08-2012 03:10 PM

Does anyone know where to buy flat black plasti dip locally? I've tried Lordco, Home Hardware, Lowes and Rona without any success.

LP700-4 03-08-2012 03:14 PM

Home hardware has it im pretty sure.

jaebomb 03-08-2012 03:18 PM

I called them to confirm and they said it wasn't available. I assumed the person on the phone didnt bother looking so I went into the store and it really wasn't in stock

lilaznviper 03-08-2012 03:33 PM

Quote:

Originally Posted by Presto (Post 7823357)
http://ucables.com/img/ipics/AMP-RJ4...CA-R323061.jpg

Looking for some RJ45 connectors. I know NCIX has them, but they are special order. I want them cheap, as well. So, forget the big boxes.

i bought 50 of these for about 1 dollar at ebay. If you want some I can give you some since I'm finished using them and just have a lot left over.

nsx042003 03-08-2012 03:44 PM

Quote:

Originally Posted by jaebomb (Post 7823376)
Does anyone know where to buy flat black plasti dip locally? I've tried Lordco, Home Hardware, Lowes and Rona without any success.

Industrial plastics and paint on bridgeport has them. not cheap though

Overseas Auto1 03-08-2012 03:48 PM

Quote:

Originally Posted by lilaznviper (Post 7823400)
i bought 50 of these for about 1 dollar at ebay. If you want some I can give you some since I'm finished using them and just have a lot left over.

Try A-Power in Richmond.

DB2-R81 03-08-2012 04:55 PM

Quote:

Originally Posted by Presto (Post 7823357)
http://ucables.com/img/ipics/AMP-RJ4...CA-R323061.jpg

Looking for some RJ45 connectors. I know NCIX has them, but they are special order. I want them cheap, as well. So, forget the big boxes.

Depending on how many you need, I have some kicking around also, 15-20 yes, 100s no.

MG1 03-08-2012 07:00 PM

There's always RPElectronics.


They're across the street from Superstore on Rupert Street. Their old building in Burnaby has been torn down.

StylinRed 03-08-2012 07:01 PM

Quote:

Originally Posted by KingDeeCee (Post 7820113)
I'm not going to lie....they look sick as fuck. But then again...I assumed beanbag chairs went for no more than $200. $500 is a steep price to pay for a beanbag...

oh snap did they go up in price they were, on sale i guess, $250-350 for some of the fur models

while shopping around i couldnt find anything large/well made enough that wasnt around 300-500 (leather) and they werent local either (RH has a place by broadway)

MG1 03-08-2012 07:03 PM

I'm looking for 0.3 mm drill bit. So thin, you need to hold your breath when drilling.

jplus 03-08-2012 08:54 PM

Quote:

Originally Posted by MG1 (Post 7822497)

Called them and they don't have any. Thanks though.

RiceIntegraRS 03-08-2012 08:58 PM

Quote:

Originally Posted by jplus (Post 7822447)
Anyone know where I can find those old IBM model M keyboards locally? Thanks.

http://upload.wikimedia.org/wikipedi.../57/ModelM.jpg

maybe along shot but try the local highschools or elementary schools? i remember using those back in the day

guesswho 03-08-2012 09:55 PM

Quote:

Originally Posted by jaebomb (Post 7823384)
I called them to confirm and they said it wasn't available. I assumed the person on the phone didnt bother looking so I went into the store and it really wasn't in stock

bought mine from homehardware on commercial a few weeks ago, if not you can buy from this guy http://www.revscene.net/forums/66067...ray-paint.html

!Tigger 03-08-2012 10:09 PM

anyone know where to get Dunhill switch smokes(korean)?? i cant find them lol

Mike Oxbig 03-08-2012 10:37 PM

http://www.khltrading.com/Pic/Air/Se...remium_bro.jpg

Ride 03-08-2012 10:47 PM

Quote:

Originally Posted by MG1 (Post 7823669)
I'm looking for 0.3 mm drill bit. So thin, you need to hold your breath when drilling.

I seen these very tiny bits at Midland Liquidators on Kingsway u can call and try there


All times are GMT -8. The time now is 08:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net