How much and who to go for for mounting tv?
 

So I recently bought a new TV from BB and bought a full motion mount seperately. Should I/would BB mount it and how much would it cost? Or can somebody recommend someone who does this semi-professionally that can help out?

Thanks in advance.

http://www.ultimategarage.com/shop/i...wrench-400.jpg
http://www.cordlessdrills.us/cordless-drill-374.jpg
http://shop1.actinicexpress.co.uk/sh...atalog/18l.jpg


and you're good to go

Easy to DIY

You just need to keep in mind how big or heavy your tv is and what kind of studs (wood or steel) are you screwing into. A very easy way to do it is to get a piece of wood or plywood and screw it into the studs, then you have a good piece of backing to support your TV and it is totally reversible when you want to take it out. (Just unscrew and mud in the holes for undo)

My dad did it by himself pretty fast I agree with DIY, if you have a buddy who's average-decent with tools and a case of beers that's another option. Don't find professionals just because it wouldn't be worthwhile to make a house call over something that small, it'll be quite the rip

^best way to mount a flat screen to steel studs is a piece of plywood spanning two studs, and secured with 6- 8 toggle bolts. Different toggle bolts have different weight ratings, so make sure you get mores that are strong enough to hold the weight, Hilti are the best.

If you can't DIY it, there are many private companies that will do it for less money and do a better job than best buy.

/reads op's name

Your best solution to mounting a tv:
1. Get stupid high
2. Go to home depot and ask them what tools you need to install a tv mount onto a wall
3. Buy that shit
4. Call up a buddy and ask for help installing tv
5. Get fcukin ripped w/ said buddy
6. Do your best to install wall mount and tv
7. Play some modern warfare 2

Following advice given by home depot employees will lead to epic failure.

Most ppl should already have those the basic tools needed. If you don't, you can buy them and use them for future projects, or you can borrow from a friends.

anyways.

Just follow the instructions that came with the TV wall mount. It's not rocket science.

of ya.. and if you get stuck, go smoke a joint and then continue.

^in that case rent out Bob Villa dvd box set and then proceed to home depot

http://www.simmonsstudio.com/images/BobDVD_Large.jpg

I just did a quick youtube search:

I was just about to suggest a Youtube search for DIY videos.

Also a stud finder is a key tool to have.
Also only use the drill to drill holes and not to screw in any bolts to your tv.
Some of the newer brackets have built in levels attached.
Think of it this way you could pay someone to install at a high price.
Or if you have to go out and buy tools and install yourself. The price could work out to be the same but in the end if you DIY you have new tools to keep.

When mounting a wall mount make sure you find the studs so you will have more support. It's really simple actually but if your asking these questions take video while installing it cause we want to see the vid if some carnage happens.

retardedly easy

I just mounted 2 tv's one in my own house and one in a family member's. All you need is a drill (rent from home depot or A&B tool rentals, they're cheaper than home depot usually) and a level (buy a big one from a dollar store) and a measuring tape (if you don't have one, you're not a man. Go to ikea and steal a free measuring tape). A set of screwdrivers everyone should have, but if you don't buy one @ home depot/anywhere (safeway even carries them). And obviously a stud finder, but homedepot/A&B tool rentals also rents them out.


It's not that hard, just stay sober and keep a level head and, unless your seriously handicapped, it'll be easy. I mounted both tv's by myself .. it was a bitch, with a person was helping me would've been much easier.

If you don't have any of the tools, call someone to do it for you. If you are only missing the drill and studfinder ... it'll be like $30 to rent both for a day. You'll save money and have the satisfaction of knowing you did it yourself.

^
Least expensive place to buy screw drivers is Canadian Tire, if you only need it occasionally then a multi-bit one will be fine.
You can buy a good tape measure for $5 at any hardware store, why would you steal a junk one from Ikea?
A stud finder isn't absolutely necessary, if you have a good ear just knock on the wall till the sound is solid instead of hollow.
A dollar store level is about as accurate as eyeballing it.

^You don't need a stud finder, just knock on the drywall. It takes a bit of practice but you will eventually pick up the skill.

EDIT: You beat me to it.

^Canadian tire is a bit pricy, try one of those smaller tools only stores like Summit tools, etc.

Or to avoid all of that you could just look for wall sockets. Wall sockets always have a stud directly beside them, just knock to hear where it is, then draw a line up and you can use that stud.

Studfinders just make it way easier.

for someone who doesn't know what they are doing do you think the knock on the wall method is a smart move? Not a chance.

What about Princess Auto for tools and they are open Sunday

yes they are as well KMS is great for renting tools

I always buy the tools I need professionally from KMS or companies that cater specifically to my trade. I always buy the tools I DIY with at Canadian Tire, the secret is watching for them to put it on sale for 70% off, which is basically once a month for anything mastercraft.

It's not rocket science to listen for the change in sound. If you can't manage to do that then you'll have trouble later on, because thats easier than mounting the brackets, especially if there are steel studs.

They'll develop their putty and painting skills in the process though.

haha a dab of white tooth paste fills those holes well.

Not that simple when you have to install wood to drill into if you want to mount it on dry wall :(

Steel studs you mean, you can't mount anything to drywall.

Unfortunately, I've never done home DIY projects before so I don't think its the best idea that I try to do this myself :whistle:

Any self proclaimed handy-man that wanna help out ? I'm in Richmond and there will be rewards :hotbaby: