i have a brand new, Borg warner s200sx 75-70 turbo with a t4 twinscroll exhaust housing and 4 inch inlet for sale. its 1.09ar and is similar in size to the gt30, 3076 turbos but with more top end. information taken from fullrace
The S200SX 75/70 is basically a Twinscroll T4 GT30R, but with a higher flowing compressor. The turbine wheel is a 10 blade turbine, in a T4 twinscroll turbine housing, but with T3 sized openings. WE STRONGLY RECOMMEND PORTING THE TURBINE HOUSING TO MATCH T4 SIZE OPENINGS. Recommended for use in quick spooling 380-480+ whp applications. It uses a 7-bladed Extended-Tip compressor wheel w/ 56mm inducer & 75mm exducer rated at 58lb/min. 3" inlet compressor housing, 2" outlet. Comes standard with a 1.22 A/R Twinscroll T4 turbine housing (recommended). 1.15, 1.09, 1.00 and .83 A/R Twinscroll T4 housings are also available, 1.22 is recommended. Journal Bearing and Oil Cooled only (watercooling and BB CHRA not applicable).
i bought this turbo from full-race and had a 3 inch v band housing installed. brand new, never used. will make big power on hondas, Sr20, rb20/25, etc
$850
steve.ozdesigns@gmail.com 
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
