REVscene Automotive Forum - Program 2001 Corolla key fob

REVscene Automotive Forum (https://www.revscene.net/forums/)

- Toyota / Lexus Tech Resources (https://www.revscene.net/forums/toyota-lexus-tech-resources_311/)

- - Program 2001 Corolla key fob (https://www.revscene.net/forums/659372-program-2001-corolla-key-fob.html)

Program 2001 Corolla key fob

Hi, I need to program a keyless entry fob for a 2001 corolla, I've been looking online, but i can't find the instructions. Can anyone help me out?

Thanks!

:pokerface:

None of those work for the 2001 corolla...

if i remember correctly, this is how it's done... now keep in mind, this is with the square-ish shaped remote with the two rubber buttons on it. the top button should have a dimple. 89742-01010 i believe is the part number.. they look like this ebay ad... http://www.ebay.com/itm/2001-2002-TO...ht_1537wt_1156

steps:

1. drivers door open
all other doors closed
drivers door unlocked

2. insert key into ignition and pull out

3. press the lock and unlock buttons 5 times
lock, unlock, lock, unlock, lock, unlock, lock, unlock, lock, unlock

4. close the drivers door, then open it again

5. insert key into ignition, turn ignition on, and then off. then pull key out

locks should shuffle lock/unlock once

6. press both the lock and unlock buttons at the same time and hold for 1 second.

the locks should shuffle lock/unlock once

repeat step 6 if you have more than one remote.

it's a good idea to program all the remotes to the car again, just incase this procedure accidentally deletes one of them...

post again here if the procedure doesn't work...

THANK YOU. That is exactly what I needed!:)

Quote:

Originally Posted by narfy (Post 7723329)

if i remember correctly, this is how it's done... now keep in mind, this is with the square-ish shaped remote with the two rubber buttons on it. the top button should have a dimple. 89742-01010 i believe is the part number.. they look like this ebay ad... 2001 2002 TOYOTA COROLLA NEW KEYLESS ENTRY REMOTE MR | eBay

steps:

1. drivers door open
all other doors closed
drivers door unlocked

2. insert key into ignition and pull out

3. press the lock and unlock buttons 5 times
lock, unlock, lock, unlock, lock, unlock, lock, unlock, lock, unlock

4. close the drivers door, then open it again

5. insert key into ignition, turn ignition on, and then off. then pull key out

locks should shuffle lock/unlock once

6. press both the lock and unlock buttons at the same time and hold for 1 second.

the locks should shuffle lock/unlock once

repeat step 6 if you have more than one remote.

it's a good idea to program all the remotes to the car again, just incase this procedure accidentally deletes one of them...

post again here if the procedure doesn't work...

are the procedures the same with a 2003 sienna?

i don't think so... see the video above for 2003 sienna programming...

err.. minor change to the instructions...

step 5. insert key into the ignition, turn it on and off twice, then pull key out
(key in, turn on, turn off, turn on, turn off, pull key out)