What did you do to your vehicle today?

[fliptuner]

No plug just means the fuel is building up.........give it some time.



I changed my F/R LCA bushings:

Spoiler!

[cruz-in]

Diffuser.IN.Finally

[Lomac]

You can see the cracked boot of #3. Must have happened at the same time because it looked fine a couple weeks ago when I checked it.

[320icar]

installed a catless 3" downpipe on my focus the other weekend. bumped my cobb accessport up to stage 2 91 octane tune. was testing it out a bit, bang shifted and...


Untitled by 320iCar, on Flickr

[cruz-in]

boost busted your dildo lol

[Expresso]

Now you can really use it for its intended purpose.

[fliptuner]

Originally Posted by Expresso

Now you can really use it for its intended purpose.

Hardparking?

[underscore]

I went to replace all the brakes on my moms Tuscon for its second OOP, expecting everything to be trashed but the front pads are at 50% outer/25% inner, rotors are smooth. Rears are at 50% all around but have some grooving that matches the rotors. Now it failed the OOP because the rotors "are all grooved and all need to be replaced".

So now I have to tear it all apart again and replace perfectly good brakes because some twat won't pass it until I do (or pay them $800 to do pads and rotors when the parts cost <$400). Fucking bullshit.

[Grim]

after a whole year of drooling over some authentic brides.. finally got em!

[Gh0stRider]

Overheating....
Coolant Leak...
FML...

[hud 91gt]

Installed new valve seals in the Datsun and took her for a drive. Still smoked. So I pull the engine. Had it out in a hair over 2 hours this time around.

[Mr.Money]

Originally Posted by Lomac

Spark plug blew itself out of #3 on my way to work today.

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/11705125_10155851543575080_3111019590595876450_n.j pg?oh=612e1e5927fb0fb5664b6982cd67cffd&oe=565C48A6[/img]

Need to source a helicoil locally to fix it. Threads in the head are stripped.

holy no gap...wtf.

[Spectre_Cdn]

Inspected the brakes on the CB7, expecting to see little pad left because of squeaks when braking. Turns out there's still plenty left, front and back

Rotated the tires while I was at it.

[fliptuner]

Did you try scuffing the pads ad lubing the sliders?

[bcuzracecarz]

My inner hood rat came out tonight, decided to take matters in to my own hands, bitches be rubbin

[fliptuner]

^^^That looks so fucking sketchy.

Spoiler!

At least put the beer on the ground where it's more stable.

[bcuzracecarz]

Turned out great, no paint cracks and half buzz, zero complaints

[Spectre_Cdn]

Originally Posted by fliptuner

Did you try scuffing the pads ad lubing the sliders?

No, I only did a visual inspection

I should've opened the calipers to check them out but I was too lazy

[fliptuner]

Lol, I always harass people that do 75% of the work and don't go the rest of the way. The car's already up, with the wheels off, come on man?!?!

[underscore]

Originally Posted by bcuzracecarz

My inner hood rat came out tonight, decided to take matters in to my own hands, bitches be rubbin

You did it the fancy way, I ended up having to use vice grips and a rubber mallet to roll mine as I couldn't get a roller or even a bat to fit

[a00755836]

bcuzracecarz, show us the final result!

[bcuzracecarz]

Originally Posted by a00755836

bcuzracecarz, show us the final result!

Hard to get a good angle of it with my potato fone but no rubbing and once coils are installed it'll be much better

[a00755836]

thx. if i had more patience, i would do diy fender rolling. lol. ill end up like this guy.

YouTube

[tastic]

Replaced the oem 4300k bulbs with cbi in the roadster.

[i-vtecyo]

Sold the VR6 Ginster :'(