Vancouver Auto Chat 2016 VAC Community Head Moderator: Raid3n | | |
12-20-2015, 11:29 PM
|
#6676 | Rs has made me the woman i am today!
Join Date: Mar 2012
Posts: 4,368
Thanked 5,225 Times in 1,389 Posts
Failed 376 Times in 130 Posts
| Quote:
Originally Posted by Pidish theres no reason to have brighter DRL's, its stupid. your car already has HID's, just use those... | Use HIDs as DRLs? You wouldn't want to use your HIDs as DRLs as running those bulbs at a reduced voltage will damage the bulb and the ballast and essentially everything related to them. Not seeing the connection here...
To be fair, most new vehicles, particularly German vehicles, have insanely bright LED DRLs, which simply dim when the in-most-cases HID low beams turn on. It's not really the brightness of the Cree LEDs that concern me, as much as how the reflector setup is optimized for a high beam pattern that shoots light into the skies, whereas cars that actually came from factory with LED DRLs, at least the ones I'm aware of, usually have the LED DRLs setup in a strip format that isn't done in a reflector housing.
With that being said, I've seen a lot of LEDs stuck into reflector housings as DRLs, even supposedly ultra bright Cree bulbs, and pretty much every vehicle I've seen with LED DRLs retrofitted have the actual light intensity significantly dimmer than any incandescent setup. Reflector housings will never be able to properly distribute light from anything but an incandescent halogen bulb. So I will leave you with the benefit of doubt that it is in fact the camera not being able to capture the true intensity of the LED DRL.
__________________ [13-03, 11:25] MG1 when you hit the brakes, it shoots cum at pedestrian - bukkake
[12-03, 19:06] meme405 That e30 is so mexiflushed I thought we were in albuquerque
[12-03, 23:03] rb when i see a modded element. I have nothing but respect. either the parents kicked him out or the guy is killing hookers in the back |
| |
12-20-2015, 11:40 PM
|
#6677 | Revscene.net has a homepage?!
Join Date: Jan 2013 Location: Richmond
Posts: 1,295
Thanked 1,934 Times in 494 Posts
Failed 31 Times in 15 Posts
|
In the spirit of Christmas, made a Santa with ringing bells, to put on top of my car.
Will post a pic of the entire car later in better weather. |
| |
12-20-2015, 11:55 PM
|
#6678 | Willing to sell a family member for a few minutes on RS
Join Date: Apr 2011 Location: North vancouver
Posts: 12,628
Thanked 32,346 Times in 7,533 Posts
Failed 213 Times in 161 Posts
| Quote:
Originally Posted by Akinari Use HIDs as DRLs? You wouldn't want to use your HIDs as DRLs as running those bulbs at a reduced voltage will damage the bulb and the ballast and essentially everything related to them. Not seeing the connection here...
To be fair, most new vehicles, particularly German vehicles, have insanely bright LED DRLs, which simply dim when the in-most-cases HID low beams turn on. It's not really the brightness of the Cree LEDs that concern me, as much as how the reflector setup is optimized for a high beam pattern that shoots light into the skies, whereas cars that actually came from factory with LED DRLs, at least the ones I'm aware of, usually have the LED DRLs setup in a strip format that isn't done in a reflector housing.
With that being said, I've seen a lot of LEDs stuck into reflector housings as DRLs, even supposedly ultra bright Cree bulbs, and pretty much every vehicle I've seen with LED DRLs retrofitted have the actual light intensity significantly dimmer than any incandescent setup. Reflector housings will never be able to properly distribute light from anything but an incandescent halogen bulb. So I will leave you with the benefit of doubt that it is in fact the camera not being able to capture the true intensity of the LED DRL. | Pretty sure he means if you want brighter DRLs just turn your lights on. You found a way to make it quite complicated though LOL.
__________________
98 technoviolet M3/2/5 Quote:
Originally Posted by boostfever Westopher is correct. | Quote:
Originally Posted by fsy82 seems like you got a dick up your ass well..get that checked | Quote:
Originally Posted by punkwax Well.. I’d hate to be the first to say it, but Westopher is correct. | |
| |
12-21-2015, 12:06 AM
|
#6679 | It's like going crazy when you're already nuts
Join Date: Aug 2005
Posts: 5,903
Thanked 3,066 Times in 793 Posts
Failed 90 Times in 38 Posts
|
Started the tear down today... Driveshaft out, exhaust off. Pulling the diff and axles next. Gonna leave the hubs on for the next owner to deal with lols more hassle than its worth since I'm just stripping down the car anyways. Everything off my turbo Miata is up for grabs!
|
| |
12-21-2015, 12:44 AM
|
#6680 | My homepage has been set to RS
Join Date: May 2009 Location: Burnaby BC
Posts: 2,246
Thanked 2,657 Times in 543 Posts
Failed 43 Times in 25 Posts
|
Just changed the front springs on the e92 for Eibach Sportlines that have a pretty aggressive drop.. From what I remember my friends e90 328i was tucking a bit of tire. After installing it I'm still at a 1.5 finger gap aha, awd sucks. My axle also kinda fell out when I was installing it, which was also gay. And on top of that, I had to compress the springs around 4 inches to just be able to get the top hats back on, and the eibachs are already about 4 or 5 inches shorter than stock. It was ridiculous with the crappy portable spring compressor things I had, took forever to get it all back together. On the bright side, they ride practically like stock since my stock awd suspension was already stiff as hell. I guess I don't need a slammed car for winter, still kinda disappointing though
|
| |
12-21-2015, 01:02 AM
|
#6681 | Returner of Lost Phones and Turtles
Join Date: Feb 2011 Location: Vancouver
Posts: 3,117
Thanked 3,997 Times in 963 Posts
Failed 217 Times in 69 Posts
| Quote:
Originally Posted by Akinari Use HIDs as DRLs? You wouldn't want to use your HIDs as DRLs as running those bulbs at a reduced voltage will damage the bulb and the ballast and essentially everything related to them. Not seeing the connection here...
To be fair, most new vehicles, particularly German vehicles, have insanely bright LED DRLs, which simply dim when the in-most-cases HID low beams turn on. It's not really the brightness of the Cree LEDs that concern me, as much as how the reflector setup is optimized for a high beam pattern that shoots light into the skies, whereas cars that actually came from factory with LED DRLs, at least the ones I'm aware of, usually have the LED DRLs setup in a strip format that isn't done in a reflector housing.
With that being said, I've seen a lot of LEDs stuck into reflector housings as DRLs, even supposedly ultra bright Cree bulbs, and pretty much every vehicle I've seen with LED DRLs retrofitted have the actual light intensity significantly dimmer than any incandescent setup. Reflector housings will never be able to properly distribute light from anything but an incandescent halogen bulb. So I will leave you with the benefit of doubt that it is in fact the camera not being able to capture the true intensity of the LED DRL. | Most of those who have LED DRL's, tend not to use bulbs such as those ones he posted which are MEANT to be actual headlights. Usually when those bulbs are put in even halogen projectors or even reflectors they arent glaring because they are aimed somewhat low, but when you add LED's that have the brightness of actual headlights combined with a reflector that is meant for high beams then thats when you start to get blinding issues.
Mine are rated for 400lm and thats more than enough for DRL duties. I highly doubt his are actually 4800lm cause thats prob ebay rating but those are still high powered bulbs for headlights which is still equivalent of at least 3000 probably.
__________________
21' 718 Cayman GTS 4.0
23' VW MK8 GTI 40th Anniversary
18' Tesla Model 3 LR RWD
21' Ducati Streetfighter V4 S
-- 16' Mineral Grey F80 BMW M3 6MT SOLD -11/22
22' Halo Toyota GR86 6MT SOLD -11/22
12' Phantom Black - B8 Audi S4 - SOLD 04/19
07' WDP Acura TL Type-S - A-Spec/ATLP/H&R - SOLD 12/17
18' Matte Silver Ice - Triumph 765 Street Triple RS - SOLD 4/21 |
| |
12-21-2015, 01:37 AM
|
#6682 | Rs has made me the woman i am today!
Join Date: Mar 2012
Posts: 4,368
Thanked 5,225 Times in 1,389 Posts
Failed 376 Times in 130 Posts
|
Unless of course it is like he says, and the LEDs are in fact running a decreased voltage draw because he did not pull his DRL fuse since he did say the high beams still function.
I was always under the impression that running anything that's not incandescent (LED, HID) as DRLs under reduced voltage will damage the bulb. I know for sure that is the case with HID, but don't LEDs also have difficulty running at reduced voltage/brightness?
All you folks with two or three headlight bulbs in each headlight assembly, so jealous lol. I only have one (albeit projector retrofitted) headlight bulb that serves as high and low beam, had to pull my DRL fuse when I initially installed the HIDs so they wouldn't run on reduced voltage draw. Wired up my fogs independently, stuck in Nokya yellow bulbs and yellow Lamin-x, not exactly bright but hella tite JDM yo, so whenever I start the car I turn on my fogs haven't bothered wiring them to turn on automatically whenever I start the car.
__________________ [13-03, 11:25] MG1 when you hit the brakes, it shoots cum at pedestrian - bukkake
[12-03, 19:06] meme405 That e30 is so mexiflushed I thought we were in albuquerque
[12-03, 23:03] rb when i see a modded element. I have nothing but respect. either the parents kicked him out or the guy is killing hookers in the back
Last edited by Akinari; 12-21-2015 at 01:43 AM.
|
| |
12-21-2015, 08:42 AM
|
#6683 | To me, there is the Internet and there is RS
Join Date: Apr 2007 Location: Okanagan
Posts: 16,724
Thanked 9,406 Times in 4,095 Posts
Failed 427 Times in 225 Posts
|
I don't get the point of bright DRLs or even low beams, your high beams should be the only thing you make much brighter.
__________________ 1991 Toyota Celica GTFour RC // 2007 Toyota Rav4 V6 // 2000 Jeep Grand Cherokee
1992 Toyota Celica GT-S ["sold"] \\ 2007 Jeep Grand Cherokee CRD [sold] \\ 2000 Jeep Cherokee [sold] \\ 1997 Honda Prelude [sold] \\ 1992 Jeep YJ [sold/crashed] \\ 1987 Mazda RX-7 [sold] \\ 1987 Toyota Celica GT-S [crushed] Quote:
Originally Posted by maksimizer half those dudes are hotter than ,my GF. | Quote:
Originally Posted by RevYouUp reading this thread is like waiting for goku to charge up a spirit bomb in dragon ball z | Quote:
Originally Posted by Good_KarMa OH thank god. I thought u had sex with my wife. :cry: | |
| |
12-21-2015, 11:47 AM
|
#6684 | My homepage has been set to RS
Join Date: May 2009 Location: Burnaby BC
Posts: 2,246
Thanked 2,657 Times in 543 Posts
Failed 43 Times in 25 Posts
|
I like brighter low beams as long as it's aimed correctly haha, it's nice to have better visibility at night without having to use your high beams
|
| |
12-21-2015, 09:34 PM
|
#6685 | RS Operative (G)
Join Date: Oct 2007 Location: GYM
Posts: 12,640
Thanked 4,566 Times in 1,529 Posts
Failed 406 Times in 127 Posts
|
__________________
╔╦╦╦═╦╗╔═╦═╦══╦═╗
║║║║╩╣╚╣═╣║║║║║╩╣
╚══╩═╩═╩═╩═╩╩╩╩═╝
|
| |
12-23-2015, 11:27 AM
|
#6686 | Rs has made me the man i am today!
Join Date: Aug 2007 Location: Richmond
Posts: 3,469
Thanked 1,437 Times in 376 Posts
Failed 53 Times in 21 Posts
|
Diesel Geek short shifter and Forge weighted Big Knob installed on the Jetta
Shifts feel so good and precise
__________________ '00 Honda Accord V6 [sold]
'95 BMW 325i Cabriolet [RIP]
'03 VW Jetta 1.8T [RIP]
'06 BMW 330i [RIP] '02 BMW M3 '99 Honda Civic SIR [sold] '19 Civic Type R[sold] '22 MINI Cooper SE My Photojournal: simplexcars |
| |
12-23-2015, 07:01 PM
|
#6687 | Need my Daily Fix of RS
Join Date: Jun 2013 Location: Vancouver
Posts: 299
Thanked 392 Times in 98 Posts
Failed 40 Times in 12 Posts
| Quote:
Originally Posted by Gerbs Washed yesterday.
and this | did you buy a s2k?
|
| |
12-23-2015, 07:55 PM
|
#6688 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,774
Thanked 2,925 Times in 762 Posts
Failed 367 Times in 95 Posts
|
not quite ready to do the wheels yet....but experimented with plastidip 'pearlizer'...
here I sprayed 2 light layers of pearlizer over black dip. yielded a very metallic silver. Will be applying pearlizer to anthracite grey dip to lighten the darkness of the grey.
Last edited by Acura604; 12-23-2015 at 08:25 PM.
|
| |
12-25-2015, 09:13 PM
|
#6689 | 14 dolla balla aint got nothing on me!
Join Date: Mar 2009 Location: Richmond
Posts: 627
Thanked 319 Times in 111 Posts
Failed 31 Times in 10 Posts
|
Pulled apart door and replaced the door lock actuator
__________________
2006 Acura TSX - Carbon Grey Pearl 6MT "The value of life can be measured by how many times the soul has been deeply stirred"- Soichiro Honda
|
| |
12-27-2015, 02:09 PM
|
#6690 | NOOB, Not Quite a Regular!
Join Date: Dec 2015 Location: Vancouver
Posts: 30
Thanked 4 Times in 3 Posts
Failed 47 Times in 6 Posts
|
What did you use to get the Acura embalm black is that regular spray paint?
|
| |
12-27-2015, 02:17 PM
|
#6691 | Head of HR....have a seat on that couch
Join Date: Jan 2003 Location: Coquitlam
Posts: 21,877
Thanked 15,598 Times in 4,324 Posts
Failed 284 Times in 130 Posts
| Quote:
Originally Posted by mciroc What did you use to get the Acura embalm black is that regular spray paint? | Quote:
Originally Posted by Acura604 here I sprayed 2 light layers of pearlizer over black dip. yielded a very metallic silver. Will be applying pearlizer to anthracite grey dip to lighten the darkness of the grey. |
__________________ feedback Originally posted by v.b. can we stop, my pussy hurts... Originally posted by asian_XL fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol Originally posted by Fei-Ji haha i can taste the cum in my mouth Originally posted by FastAnna when I was 13 I wanted to be a video hoe so bad RSUV #7 |
| |
12-27-2015, 08:39 PM
|
#6692 | Wunder? Wonder?? Wander???
Join Date: Dec 2003 Location: Burnaby
Posts: 226
Thanked 239 Times in 18 Posts
Failed 0 Times in 0 Posts
|
Just finished painting and installing my 3d printed NSX-R style horn button. Looks just like the real thing, but didn't cost me $250!
|
| |
12-27-2015, 09:51 PM
|
#6693 | I contribute to threads in the offtopic forum
Join Date: Jun 2013 Location: SRY
Posts: 2,632
Thanked 2,595 Times in 922 Posts
Failed 504 Times in 165 Posts
| Quote:
Originally Posted by busdriverman Pulled apart door and replaced the door lock actuator | man are you ever lucky. i had the door lock actuator go on my first car, 1990 honda accord and the door was stuck locked. jeez was that thing ever a royal pain to fix.
|
| |
12-27-2015, 09:54 PM
|
#6694 | Rs has made me the woman i am today!
Join Date: Jan 2011 Location: Vancouver DT
Posts: 4,322
Thanked 2,797 Times in 916 Posts
Failed 1,257 Times in 270 Posts
|
you got a 3D printer?!
__________________
Fly Your Own Flag.
|
| |
12-27-2015, 10:01 PM
|
#6695 | Editor
Join Date: Aug 2005 Location: Raincouver
Posts: 3,516
Thanked 3,179 Times in 874 Posts
Failed 56 Times in 19 Posts
| Quote:
Originally Posted by Ronac | fake it till you make it?
|
| |
12-27-2015, 10:22 PM
|
#6696 | Wunder? Wonder?? Wander???
Join Date: Dec 2003 Location: Burnaby
Posts: 226
Thanked 239 Times in 18 Posts
Failed 0 Times in 0 Posts
|
Yup, fake it till I make it. Even if I was stupidly rich, I'd still thinking spending $250 for a damn horn button is idiotic.
I got it printed at Shapeways. I made it available so anyone can order it from them. NSX-R Horn Button (EMUSNNNBE) by RonacM |
| | This post thanked by: | Akinari, dn53, gramser57, J.Bell, Jaffray, jjson, MindBomber, Peturbo, RevYouUp, tofu1413, twitchyzero, westopher |
12-29-2015, 05:39 PM
|
#6697 | I contribute to threads in the offtopic forum
Join Date: Aug 2006 Location: Abbotsford
Posts: 2,825
Thanked 1,538 Times in 495 Posts
Failed 73 Times in 28 Posts
| |
| |
12-29-2015, 07:52 PM
|
#6698 | I *heart* Revscene.net very Muchie
Join Date: Feb 2003 Location: Vancouver
Posts: 3,829
Thanked 6,590 Times in 1,166 Posts
Failed 68 Times in 23 Posts
|
Rcubed and I installed my new gauges in the Miata |
| |
12-29-2015, 09:12 PM
|
#6699 | It's like going crazy when you're already nuts
Join Date: Aug 2005
Posts: 5,903
Thanked 3,066 Times in 793 Posts
Failed 90 Times in 38 Posts
|
^ Nice. Seems like a whole bunch of local guys bought a set as well, myself included. Won't be installing mine anymore though.
|
| |
12-31-2015, 01:57 AM
|
#6700 | I contribute to threads in the offtopic forum
Join Date: Apr 2010 Location: Home
Posts: 2,988
Thanked 2,051 Times in 676 Posts
Failed 211 Times in 48 Posts
|
Had my grill plasti-dipped by PandaDog.
Tbh, I was skeptical about plasti-dip as it can cause a car to look cheap many of the times, especially on large surfaces such as a 2G TSX grill. Initially, I wanted it vinyl-wrapped in gloss back, but he assured me that he his work can yield similar results. Very happy with it.
Shoot him a PM for quality work! And yes I know, I need to get rid of that license plate frame lol |
| | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | All times are GMT -8. The time now is 08:36 AM. |