You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
If you have any problems with the registration process or your account login, please contact contact us.
I replaced my super old 3.5yr old Blackvue DR-380GHD with a newer 1080p dashcam. Decided to move the 380 to the rear...it's pretty old so the video quality is not as good as it was even though it's been cleaned.
Anyways, it's wired up to the rear now...thoughts on overall rear coverage with the cam?
it's in a newer Acura RDX:
I replaced my super old 3.5yr old Blackvue DR-380GHD with a newer 1080p dashcam. Decided to move the 380 to the rear...it's pretty old so the video quality is not as good as it was even though it's been cleaned.
Anyways, it's wired up to the rear now...thoughts on overall rear coverage with the cam?
it's in a newer Acura RDX:
Dozens of dings and finger pressure mark depressions removed - $800. Original paint a little dull, and plenty of small chips left to be dealt with, but otherwise looks amazingly good.
Last edited by Kure GS; 06-14-2016 at 11:52 PM.
Reason: Changed superlative.
did 10 hours of paint restoration... fuuckkk was it ever boring. At least the cherry pink turned back into milano red The hood came out amazing imo. 500 rock chips, virtually invisible now even when within a few feet of the car. You have to really look hard at the hood to see them as they are blended right in. I still need to switch over to BC plates
There is no flaking. The bumps you see on the hood in the 1st and 2nd picture are actually the end result of a paint pen/brush. I had about 500 rock chips that required paint. When you properly fill the chips they create an excess amount of paint around the rock chip. To get rid of the excess you have to wet sand the chip down. In the 3rd picture you can see the beginning of the excess paint being sanded away. Once there is no more excess paint around the chip and only the new paint that filled the chip it should be completely even with the rest of the paint.
After that I took a heavy cutting compound (Griot's) to buff out the clear. The wet sanding was done with 1500 grit and 2000 grit. After the heavy cut (used to remove the heavy scratches in the 2nd pic) and any swirl marks, deep scratches etc from years of abuse I used 2 other polishes. A medium then a very fine. After the final polish I applied a paint sealant (Griot's). You rub this on by hand and let it sit for an hour. After the paint is sealed I took Autogleam wax and applied it by hand. Really it is about 7 stages included wet sanding. An ultra pain in the ass but it is how you can take worn out 16 year old paint and turn it pretty close to fresh. I'm pretty damn proud of how the hood turned out.
Also lol at the list, going to have to pass. This kind of work is not my idea of fun.
did 10 hours of paint restoration... fuuckkk was it every boring. At least the cherry pink turned back into milano red The hood came out amazing imo. 500 rock chips, virtually invisible now even when within a few feet of the car. You have to really look hard at the hood to see them as they are blended right in. I still need to switch over to BC plates
Nice work with the restoration. For anyone else interested, there's a video explaining this entire process.