You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
If you have any problems with the registration process or your account login, please contact contact us.
Installed my sub today. 10" Pioneer shallow sub. Not bad, and it was only $150 lol. Driven by a little 300W single channel Blaupunkt amp, it's all I need for such a small cabin.
15 minute O2 sensor change for a friend, turned into a 5hr ordeal.
It snapped flush with the exhaust manifold on my buddy's RX7 (FC). Had to remove the air pump, hoses, and 2 port solenoids, just to get to the manifold bolts. Of course the heat sheild and downpipe bolts snapped. Then, since I didn't want to fuck up the threads by drilling it out, I had to break out the hot wrench and use an easyout. Of course that didn't work so I ended up heating what was left of the sensor and collapsed it inside the hole with a punch.
Originally posted by v.b. can we stop, my pussy hurts... Originally posted by asian_XL fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol Originally posted by Fei-Ji haha i can taste the cum in my mouth Originally posted by FastAnna when I was 13 I wanted to be a video hoe so bad
took car to the shop to get wheel bearing changed. there goes 300$ , dam i wish i was mechanically inclined
I got quoted 480 for replacing my whole assembly (left+right) on a 350z that's parts and labour.... 300 to replace "a" bearing is overkill sorry to hear
Back to topic.... I've done nothing to my ride today. Cleaning interior when I get up though :P
dam $300 to change wheel bearings? My mechanic just quoted me $300 to do my clutch and machine flywheel.
$60+ machining, $100 for a clutch disc/ $300 incl. PP and bearing, 3+hrs labour. That's either a really good buddy that's doing you a favour, not a licensed shop, or pure labour cost.
Quote:
Originally Posted by bloodline129
I got quoted 480 for replacing my whole assembly (left+right) on a 350z that's parts and labour.... 300 to replace "a" bearing is overkill sorry to hear
Bolt in vs pressed in. Your wheel bearings only require 4 bolts to be removed to swap the bearing/hub assembly, where as his requires the whole knuckle to be removed and the races pressed out of the knuckle and stub shaft, then new ones pressed in and the knuckle reassembled. There's a huge discrepancy in labour. I could do yours in 1.5 hours in my driveway, his requires a press.
What he was charged is very reasonable and you shouldn't be making the guy feel bad when you don't know what's entailed in the job or you can find people to basically work for nothing.
Originally posted by v.b. can we stop, my pussy hurts... Originally posted by asian_XL fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol Originally posted by Fei-Ji haha i can taste the cum in my mouth Originally posted by FastAnna when I was 13 I wanted to be a video hoe so bad
^^ My neighbor who is a retired mechanic He's the only person I trust to work on my car besides myself, cuz...he's my neighbor lol.
I guess its not that amazing of a deal, since I'm providing the clutch disc and pressure plate for him, so ya pretty much labor. But I save on paying taxes.
Started pulling the studs in the head of my ZC for the intake manifold so I can’t bolt up the adapter. One of the damn things won’t come out. Oh goodie.
Started pulling the studs in the head of my ZC for the intake manifold so I can’t bolt up the adapter. One of the damn things won’t come out. Oh goodie.
Finally got all the damn studs out, after tearing up my knuckles really good. Put the manifold adapter on, and then realized that I need to source an oil jet that I dont think Acura makes anymore. Goodie x 2.
Originally posted by v.b. can we stop, my pussy hurts... Originally posted by asian_XL fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol Originally posted by Fei-Ji haha i can taste the cum in my mouth Originally posted by FastAnna when I was 13 I wanted to be a video hoe so bad
ohhhh yeah, 2 layers of paint sealant and a layer of wax...... shine shine shine!!!
A white car shining at night while everyone looks....
__________________
"Just because any car nut can tell you every possible performance specification of a Ferrari doesn't mean he can drive. Most of these people live in places where they've never even seen a Ferrari, much less ever owned one themselves."
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
sorry to hear
He's the only person I trust to work on my car besides myself, cuz...he's my neighbor lol.
