Yeah, spacers with build in studs starts at 15mm+.
10mm and 5mm are too thin to have build in studs.
I'll be measuring the exact measurement later today to see how many mm I need and go from there.

Called a concrete guy just to be safe.
(Firm Built, as mentioned by Catalin in VLS/Home Reno)

He checked it out, said the slab wasn't deep enough and that it was at most 2 inches. The lift requires 4 inches min. It's not really something I want to fuck with since it's a safety issue. I don't want it to ever fall on me/car due to a shit install.

He's calling me back with a quote tomorrow, and suggested that he digs 2x2x1, then fills. Sounds reasonable.

Also asked him about putting in a 20x8x1 slab on the side of my driveway, and he said it would be about $1700. So I'm really hoping that the fix on the anchor sites won't be anymore than $500.

This lift better be worth it.

Cleaned and lubed my chain... I swear it's chain lube! :troll:
http://i50.tinypic.com/5n0x6o.jpg

From piss yellow bulbs to white LEDs;

http://a2.sphotos.ak.fbcdn.net/hphot...71900547_n.jpg

Washed and waxed, decided to take off the license plates like mb_ does. Then went to get gas and more wax from Canadian Tire, and drove about a block before realizing I didn't put the plates back on :badpokerface: I blame you, mb_ lol. Also cleaned the wheels and finalized my headlight adjustment.

Someone got a bit too excited.

http://i282.photobucket.com/albums/k...2/DSC01547.jpg

Get the tailights done today

http://farm9.staticflickr.com/8309/7...7f8c4acf_z.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...35746861_o.jpg
:fullofwin:

Project Kics makes a 10mm with built in studs.

https://fbcdn-sphotos-a-a.akamaihd.n...88249599_o.jpg

Installed CAI on the FRS

How you got your car up on ramp the other way around ?
Jack ??

levitation

yep, only way to do it is jacking it up high enough to fit the ramps

Very nice Exige Kchan, how do you like it compared to the ex P-car?

Polished my 'pipes' with mothers aluminum polish and installed super white LEDs for all interior lighting.

http://img195.imageshack.us/img195/2...7820533046.jpg
http://img842.imageshack.us/img842/2...7820568432.jpg

*LEDs are from superbrightleds.com

So I finally was able have my new rims clear the OEM brembos.

http://i.ebayimg.com/t/15MM-HONDA-WH...wog~~60_12.JPG

+


http://farm7.staticflickr.com/6015/6...22505af0_z.jpg

=

http://i100.photobucket.com/albums/m...o/IMG_0117.jpg

http://i100.photobucket.com/albums/m...o/IMG_0120.jpg


:badpokerface:
Not sure if I'm feeling it.
EDIT: More pictures here http://www.revscene.net/forums/24532...ml#post8031363

The wheels look a bit small. Lowering the car should help.

Taken more then just today but i finished up with the majority of my welding and stripped the floor/roof
http://i589.photobucket.com/albums/s..._00/006-80.jpg
http://i589.photobucket.com/albums/s..._00/009-60.jpg

Nice 4x4 in the background

:)

new lugs for the summer rims
http://i1154.photobucket.com/albums/...r/6e5b5f22.jpg
http://i1154.photobucket.com/albums/...r/4e65cf41.jpg

Was running rich, and was told it might have been my valves. So I went ahead and adjusted them, to discover that wasn't my problem. Did some research online, and completely overlooked and forgot about the dirty air filter which came w/ the air box. Replaced it, and it was fine.
:fuuuuu:
http://i136.photobucket.com/albums/q...9-17102055.jpg

B1 Service
Power Steering Flush
Serpentine Belt Replacement

All for a 06 TL

Watched it sit in the driveway with no insurance and no valve cover as i wait for 20v valve cover grommets from Oregon. :(

Haha i know, ive been planning on getting it lowered just hasnt happened. And then i finally get some money and shit hits the fan.

Starter went last thursday and the Clutch went on sunday :okay:

got my blackvue dr400g II installed from ASR:)

Debadge!

http://i86.photobucket.com/albums/k8...s/DSC_3382.jpg

http://i86.photobucket.com/albums/k8...18827080_n.jpg