REVscene Automotive Forum
Page 74 of 427 « First 2464656667686970717273 74 75767778798081828384124174 Last »
Show 25 post(s) from this thread on one page

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Vancouver Auto Chat (https://www.revscene.net/forums/vancouver-auto-chat_173/)
-   -   What did you do to your vehicle today? (https://www.revscene.net/forums/666595-what-did-you-do-your-vehicle-today.html)

jackp0t 03-01-2013 12:58 AM
Quote:
Originally Posted by i-vtecyo (Post 8172116)
warmed the cat up?
Quote:
Originally Posted by Muskys SS (Post 8173086)
Methyl Hydrate??
Quote:
Originally Posted by ICE BOY (Post 8173159)
My guess would be no, since the nox dropped too.
methyl yes.
it will actually drop all the readings but depending where the problem is the drop varies.

FYI ive actually put a little bit of methyl hydrate already prior to the 1st test
but still failed i knew the car runs rich
2nd time added some more and gas = pass:fullofwin:

versep 03-01-2013 11:48 AM
Quote:
Originally Posted by Jah Dean (Post 8172613)
LED looks soooo much better :okay:

Time to do my rear LCI conversion?

gloors 03-01-2013 01:23 PM
http://i.imgur.com/8beer9Gl.jpg got my tranny fluid changed today.
Posted via RS Mobile

!e.lo_ 03-01-2013 04:17 PM
Took the driver headlight apart.
So much fucking sealant from whoever opened them last.

The projectors I got for retrofitting are too big. ugh setback.
options:
-use a smaller projector, give up D2S bulbs
-just keep the oem projectors.

Jgresch 03-01-2013 04:46 PM
^ Just go to usdm front.

AVS_Racing 03-01-2013 06:08 PM
^^ :lawl:

MikeyStyle 03-01-2013 08:01 PM
Quote:
Originally Posted by MikeyStyle (Post 8170979)
Spoiler!

got the new tires mounted on the wheels! centre caps weren't put on yet.. but you get the idea

http://mysuki.hosterbox.net/REVSCEnE...01,%202013.jpg

kakucaekz 03-01-2013 08:15 PM
^ Slap a 93 lip on that! :fullofwin:

BrRsn 03-01-2013 10:31 PM
Clutch fan delete, installed new water pump/serpentine belt/thermostat/brakes + rotors and got started installing my new radiator. Got it in there and realized it was 10:30 pm:fuckthatshit:

?uestlove 03-02-2013 11:22 AM
Good on you guys for working on your own cars! I like this thread. Post more pics
Posted via RS Mobile

JSALES 03-02-2013 06:28 PM
someone smashed my driver's side view mirror so I put back all the pieces for now until I find a replacement..

Euro7r 03-02-2013 06:59 PM
Quote:
Originally Posted by JSALES (Post 8174486)
someone smashed my driver's side view mirror so I put back all the pieces for now until I find a replacement..
Someone swiped your side mirror from the side? :fuuuuu:

JSALES 03-02-2013 08:00 PM
Quote:
Originally Posted by Euro7r (Post 8174503)
Someone swiped your side mirror from the side? :fuuuuu:
no, someone had purposely smashed my driver's side view mirror since my driver's side was against the sidewalk :rukidding:

AW607 03-03-2013 05:27 PM
http://i47.tinypic.com/2mrgkyq.jpg

:joy:

jing 03-03-2013 05:45 PM
Did the pads, rotors, and bled the brakes on le gf's ride. Rotated the tires too. Need to bleed the brakes on my daily soon too... I hate doing fluids.
Posted via RS Mobile

j.f0ng 03-03-2013 06:21 PM
Quote:
Originally Posted by AW607 (Post 8175242)
At first I was like :suspicious:
Then I was like :notbad::thumbs:

?uestlove 03-03-2013 08:32 PM
welded in patch pieces on my crx rocker panel. all the major rust on the car is fixed now, it was just the rust on the drivers side rocker panel. the rest of the car is in pretty good shape!

smallest/easiest piece first

http://i282.photobucket.com/albums/k...psee5672cb.jpg


welds grinded down and blended in as best as possible

http://i282.photobucket.com/albums/k...ps9136935c.jpg

then started on the longer piece. what a pain in the ass, but a great learning experience. i got the hang of welded body pieces.. by the end of the day.

http://i282.photobucket.com/albums/k...psaf297b75.jpg

http://i282.photobucket.com/albums/k...psd1d0dc60.jpg

http://i282.photobucket.com/albums/k...ps93673493.jpg

it turned out ok. not as smooth as i'd like, an angle grinder is overkill on such thin metal.

fliptuner 03-03-2013 09:33 PM
Did you try flux+gas?

If the grinding disc is too course, try a flap disc. Comes in 4 grits.

http://www.walter.com/Walter/en-ca/a...ss/enduro-flex

?uestlove 03-03-2013 10:18 PM
Quote:
Originally Posted by ICE BOY (Post 8175542)
Did you try flux+gas?

If the grinding disc is too course, try a flap disc. Comes in 4 grits.

http://www.walter.com/Walter/en-ca/a...ss/enduro-flex
nope, i didn't have time to grab things because i started too late in the day. i did some practice welds on scrap pieces so i could dial in the welders settings, so i think that helped. i hope. i'll try flap disks if theres still more clean up grinding to do, body filler will make it smooth but i'm trying to use as little as possible

Inaii 03-03-2013 11:16 PM
Swapped out batteries trying to figure out what's causing the volts to be so low. Still not solved :( guess I'm taking a trip to lordco tomorrow for new battery terminals...

Happy 03-04-2013 11:05 AM
Did some inexpensive cosmetic work on my bimmer (having fun with some plastidip)

Spoiler!

k2damax 03-04-2013 04:30 PM
changed my shift knob and installed deflectors

AVS_Racing 03-04-2013 04:49 PM
got new wheels, and random parts

tofu1413 03-04-2013 05:35 PM
http://sphotos-d.ak.fbcdn.net/hphoto...03467493_n.jpg

progress 21mm rear sway bar and fresh oil change done, along with a magnetic drain plug.

http://sphotos-d.ak.fbcdn.net/hphoto...53214962_n.jpg

K&N typhoon installed on saturday!

Kaolinite 03-04-2013 06:30 PM
got hella horns + front lip for my sti and swapped my summers back on


All times are GMT -8. The time now is 07:14 AM.
Page 74 of 427 « First 2464656667686970717273 74 75767778798081828384124174 Last »
Show 25 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net