replaced shifter bushings, put in braided clutch line.
Posted via RS Mobile

Finally mounted my wing!



http://imageshack.us/a/img10/5091/img3790ro.jpg

Made a spare key for my motorcycle.

put in bilstein/neuspeed coilovers weds night, and put rims on too. also got BWR hood risers

https://fbcdn-sphotos-a-a.akamaihd.n...32476264_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.n...43069142_o.jpg

Painted the interior of the new Jeep from a black/dark grey to metallic silver.


http://i738.photobucket.com/albums/x...ps342f859e.jpg
http://i738.photobucket.com/albums/x...ps08b1d4bf.jpg
http://i738.photobucket.com/albums/x...ps7c772375.jpg
http://i738.photobucket.com/albums/x...ps6b8149da.jpg

changed oil

maaaaan.... that guy....

Finally got a chance to install a short shifter with stainless steel shift knob

http://farm4.staticflickr.com/3683/8...fac5d435_c.jpg

http://farm6.staticflickr.com/5447/8...eea28b64_c.jpg

changed the oil

cracked drain and fill bolts loose on front and rear diff to make sure they weren't seized for up coming gear oil change

discovered previous owner stripped the living shit out of transmission drain bolt so back to a transfer pump to drain/ refill :(

haha not sure if you mean me for the sassy comment, or if he did something douchey at the track?

http://i105.photobucket.com/albums/m...ps8e7aafa2.jpg
projector retro fit
now need to get rid of fluting on inside of stock lens.

Yesterday.

Berk Intercooler.
Went out to test for boost leaks, and had to pull over twice to replace a broken clamp.

Good thing I only have to do this once.

https://fbcdn-sphotos-c-a.akamaihd.n...84808040_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.n...51777160_o.jpg
https://fbcdn-sphotos-c-a.akamaihd.n...61994270_o.jpg

Next :
- Replace that Rear quarter louver vent that flew off.
- Roll fenders + Lower
- Replace clutch line when it arrives. It sat for a looong time. I guess Rats got to it and there's a pinhole leak. Flushed it when I bought it and it's already contaminated.

Glad to see that intercooler kit finally go into that car! :D

Still need to put in the TechnoToy goodies you gave me. But I want to do all the suspension stuff at once.

Replaced front and rear wiper blades

I installed the EMS intercooler kit a while back and had to use the torque (t-bolt) clamps after the worm-gear clamps kept failing and popping off at 15 psi.
Really pain in the ass to install the intercoolers in the MR2, I was in some really weird positions but I love the car.

You're not properly working on the engine in an MR2 unless you're doing acrobatics at the same time! :D I want an intercooler kit too :(

Oh, also, I fixed another puncture in my rear right tire. That thing has 2 patch jobs on it now! :(

https://fbcdn-sphotos-a-a.akamaihd.n...78520445_n.jpg

picked up a set of almost new RE11 from a parted out car... :fullofwin:

https://fbcdn-sphotos-d-a.akamaihd.n...39454646_n.jpg

also put on different springs: H&R sports along with a pair of front koni yellow shocks... also installed camber bolts in the front. t'was a good day. no more stretched look on tires!

Too much Tokyo drift :troll:
Posted via RS Mobile

Good luck. It was a giant pain in the ass.

I'm not looking forward to doing the eventual Clutch job. :heckno:
or the fuel pump. :heckno::heckno:
Or the hoses. :heckno::heckno::heckno:

Clutch job was a pain, took me a weekend with a lift. I'm dreading the timing belt coming up. =/

http://uniqperformance.ca/wp-content...m-Mesh-RMX.jpg

ordered this grille for the gen, hopefully the mesh comes black and not silver

Installed Motordyne TDX V2 Exhaust.
Nissan/Infiniti guys would know what it is. :D
11 Week wait. Regret nothing.

Nissan 350z - Exhaust - MotorDyne Engineering

https://fbcdn-sphotos-d-a.akamaihd.n...15136400_n.jpg

picked up my stuff from the salvage yard and said goodbye.

http://i1345.photobucket.com/albums/...psafa40736.jpg

http://i1345.photobucket.com/albums/...ps9a4e63e7.jpg

http://i1345.photobucket.com/albums/...psda499762.jpg

http://i1345.photobucket.com/albums/...psa1292d9a.jpg

Ouch that sucks man hope your ok!!