You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
If you have any problems with the registration process or your account login, please contact contact us.
The John Norwich Riders CornerIn honour of our fellow moderator: John Norwich R.I.P. September 17th, 2014
Buy, sell, trade bikes and gear, set up bike rallies, meet discussions. #revscenebikes
What hasn't Killed me, has made me more tolerant of RS!
Join Date: May 2011
Location: Vancouver
Posts: 181
Thanked 39 Times in 32 Posts
Failed 4 Times in 1 Post
Quote:
Originally Posted by gdoh
is changing your brake pads pretty straight forward?
Very. It's just a few bolts and maybe a spring clip or two. Pad slides right out, and you reverse the process to install new ones. Youtube probably has instructions for your bike as well. Look up the forum for your bike and you'll probably find a DIY with instructions.
is changing your brake pads pretty straight forward?
It took me 15 minutes to do the front on my GF's 250r (just one side).
Removed 2 bolts that attaches caliper to fork
Removed 2 bolts from the caliper that holds the brake pads in place
Opened up the brake fluid cap (to relieve press)
Use the old brake pad and a piece of thin wood and pushed the caliper piston back in to allow space for the new brake pad (use a clap if you have to unless you are a beast)
Install new pads using some anti seize on the bolts
Re install the 4 bolts
look at the fluid level and closed the break fluid cap
Press brake until stiff again and test before riding
Just make sure that when you push the piston back in you don't damage anything. Furthermore, be careful with the brake fluid as it tends to eat paint. I wrap the area with clothing just in case anything spills. Lastly, make sure the rotor does not need machining.
Hope that helps.
I've never done a brake change before on a bike and it was really easy. Very similar to a car. YouTube also helps
was riding back from hats of day at north burnaby, while stopped at a light bike cop rolls up and said "race ya! " in good humor, of course I said no way and pointed to the rs Decal on my lid. He smiled and booked it, but caught up to him at next light, he said "i tried, I tried, but even I have to stop for lights"
was riding back from hats of day at north burnaby, while stopped at a light bike cop rolls up and said "race ya! " in good humor, of course I said no way and pointed to the rs Decal on my lid. He smiled and booked it, but caught up to him at next light, he said "i tried, I tried, but even I have to stop for lights"
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
:
