REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   HealthCare & Wellness (https://www.revscene.net/forums/healthcare-wellness_269/)
-   -   Vape/E-Cig Thread (https://www.revscene.net/forums/693314-vape-e-cig-thread.html)

Ch28 03-24-2014 02:19 PM

Quote:

Originally Posted by alwayslive (Post 8440848)
Do you guys think it is absolutely necessary to change your clearomizer/atomizers/cartomizers every 2 weeks or so? I want to get into vaping but reconsidering because you need to change the carts so often. I guess it's still cheaper than smoking though.

Only if you use the same one with a lot of different juices. If you have any thicker juice (usually coffee or chocolate) then I'd suggest you get a tank dedicated to that flavour otherwise everything is going to taste like that
Posted via RS Mobile

fliptuner 03-24-2014 02:26 PM

A pack of 5 cartos for an MT3 is less than $10, if your getting a "starter kit"

If you go mech, just get an aero and rebuild material.

Ch28 03-24-2014 02:30 PM

It also depends on how picky you are about the flavours mixing. I have a buddy that uses the same one for all his juices. He doesn't care lol
Posted via RS Mobile

!Nhan 03-24-2014 02:34 PM

where do you guys buy your kanthal wires from locally?

spades 03-24-2014 04:25 PM

^
East Side Vapes sells kanthal wick locally if you dont wanna order online

LC21 03-24-2014 06:44 PM

Americcaaa...

http://www.nytimes.com/2014/03/24/bu...=fb-share&_r=0

!Nhan 03-24-2014 10:00 PM

so decided to rebuild my Aerotank... 28awg at 10 wraps got me 1.4ohms. Using cotton wick at around 3.6v and man there's a tonne of vapor lol can't wait to get a rebuildable
Posted via RS Mobile

TOPEC 03-25-2014 02:20 AM

Quote:

Originally Posted by !Nhan (Post 8443229)
so decided to rebuild my Aerotank... 28awg at 10 wraps got me 1.4ohms. Using cotton wick at around 3.6v and man there's a tonne of vapor lol can't wait to get a rebuildable
Posted via RS Mobile

r u building 1 coil into the aero tank? mines at 1ohm @5.0V n i barely get any vapor with cotton or wick... hmm....

bloodline129 03-25-2014 04:28 AM

More air flow = more vapor
Posted via RS Mobile

!Nhan 03-25-2014 08:45 AM

Quote:

Originally Posted by TOPEC (Post 8443312)
r u building 1 coil into the aero tank? mines at 1ohm @5.0V n i barely get any vapor with cotton or wick... hmm....

yup, i rebuilt it as a single micro coil.

Quote:

Originally Posted by bloodline129 (Post 8443317)
More air flow = more vapor
Posted via RS Mobile

i've found that this isn't necessarily always the case

Vangruver 03-25-2014 10:12 AM

Hi guys. Some of you might know or follow me already on IG, but some of you might not.

Tell you what, I'll just let the photos do the talking ;)

The collection of mods and APV's that WE have.
http://distilleryimage9.s3.amazonaws...3d0d0ff1_8.jpg


Clouds and coffee
http://distilleryimage7.s3.amazonaws...bd1c8057_8.jpg

Soldado RDA at .45 ohms
http://distilleryimage0.s3.amazonaws...7073a39c_8.jpg

Rewrap time on the daily drippers
http://distilleryimage0.s3.amazonaws...2048cdbc_8.jpg

!Nhan 03-25-2014 11:15 AM

what you get your kanthal wire from?

Vangruver 03-25-2014 01:25 PM

Quote:

Originally Posted by !Nhan (Post 8443440)
what you get your kanthal wire from?

Lightening Vapes. Or temco

Vangruver 03-25-2014 01:26 PM

We ( cev) have all gauges as well

Spaceship_coupe 03-25-2014 05:25 PM

Nice to see you on here too coil_cohmander. It's johnillkid on IG.
Posted via RS Mobile

Vangruver 03-25-2014 06:20 PM

Quote:

Originally Posted by Prelude_2_NV (Post 8443628)
Nice to see you on here too coil_cohmander. It's johnillkid on IG.
Posted via RS Mobile

Hey man! I usually hang out in the sports and fitness area. But I found this thread and thought, why not?!

ae101 03-26-2014 08:37 AM

i actually wanna get started on vaping after a bit of a debate, as i hate e cigs & im not much of real.cig smoker

how.do i.get started, what a basic common setup & wide accept flavor

note:im not trying to quit smoking, just wanna give this a try
Posted via RS Mobile

TOPEC 03-26-2014 12:50 PM

Id say skip the "starter" kits n go start with a variable voltage/wattage battery n a glass tank of some sorts
Posted via RS Mobile

ae101 03-26-2014 05:59 PM

recommendations for tanks, is there any i need to look for when it comes to buying

also what are the prices on these things
Posted via RS Mobile

Arirang 03-26-2014 08:32 PM

Awwwe yisss just ordered a kayfun 3.1, kraken genesis, and a SVD.
It's gonna be fun stepping into the APVs and RBAs

Vangruver 03-26-2014 08:34 PM

Do you know how to wrap ?

I'll tell you this much, genesis tanks are a pain in the ass to get to wick efficiently. But they provide the best for flavor and vapor. More so convenient than a dripping atty, but bulkier at the same time.....

As an aside, how many of you vapers are heading to the RS spring meet?

Arirang 03-26-2014 11:21 PM

Yea I've been watching videos on how to wrap. It's gonna be fun trying to rebuild my own coils :)

Vangruver 03-26-2014 11:38 PM

awesome. just be prepared to waste a lot of wire! :P

It's fun to experiment and try out different temp's and different wicking...

just remember, torch your wire before you start wrapping a genesis atty, it makes prep a LOT easier

bloodline129 03-27-2014 08:52 AM

Vangrouver, what shop are u running? Where?
Posted via RS Mobile

Vangruver 03-27-2014 09:55 AM

Quote:

Originally Posted by bloodline129 (Post 8444694)
Vangrouver, what shop are u running? Where?
Posted via RS Mobile

I help out/work at CEV Vancouver. 4200 block of Hastings in bby. Across from Anton's


All times are GMT -8. The time now is 07:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net