| Vancouver Auto Chat 2016 VAC Community Head Moderator: Raid3n |
 | 
03-21-2017, 09:04 PM
|
#1 | | It's like going crazy when you're already nuts
Join Date: Aug 2005
Posts: 5,911
Thanked 3,069 Times in 796 Posts
Failed 90 Times in 38 Posts
| Sticky front brake caliper
Thought I had a seized front drivers caliper (smoking after a highway run, piston wouldn't compress) so I replaced L and R fronts with new re-man'd calipers. Put in new pads as well since the one that was smoking was about half the thickness of the other side, lol. Thoroughly flushed the brake fluid. With the vehicle jacked up and on stands, when the vehicle is in drive (wheels spinning free air), the right side spins fine but the left side still sticks. If my foot is on the brake in drive, once I let off, both sides spin fine for a bit but then shortly after thee left side will stop by itself.
I've already relubed the sliders on the new calipers. I also just put in a new brake hose on the left side thinking that was the culprit. With the new hose, I'm still having the same problem, except that it seems to be a little better (since the left wheel spins faster/longer compared to before).
Basically done all I can in regards to the brake system other than the master cylinder. Any other ideas?!
Edit:
After a highway run, I'm still smelling burnt brakes. Front left is most prominent, followed by front right, and rear left. Rear right has no smell.
Last edited by jing; 03-21-2017 at 09:35 PM.
| 
|  | |
03-21-2017, 09:32 PM
|
#2 | | Trollollolloing RS sine 2005
Join Date: Feb 2005 Location: Richmond
Posts: 7,093
Thanked 2,471 Times in 704 Posts
Failed 473 Times in 132 Posts
|
what car is this? do u have a LSD or open diff? r u sure its not the open diff causing only 1 side to spin?
__________________ Quote:
Originally Posted by MajinHurricane  I had some girl come into the busser station the other day trying to make out with every staff member and then pull down her pants and asked for someone to stick a dick in her (at least she shaved). | Quote:
Originally Posted by 1exotic Vtec doesn't kick in on Reverse. | Quote:
Originally Posted by Ulic Qel-Droma its like.. oh yeah oh yeah.. ohhhh yeah... OOoooOohh... why's it suddenly feel a bit better... ohhhh yeahh... ohhh...oh..fuck... it probably ripped. | | 
| | |
03-21-2017, 09:34 PM
|
#3 | | Head of HR....have a seat on that couch
Join Date: Jan 2003 Location: Coquitlam
Posts: 21,878
Thanked 15,606 Times in 4,325 Posts
Failed 284 Times in 130 Posts
|
Did you clean the sliders/bores before re-lubing? Not uncommon for reman calipers to fail too.
__________________ feedback
Originally posted by v.b.
can we stop, my pussy hurts...
Originally posted by asian_XL
fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol
Originally posted by Fei-Ji
haha i can taste the cum in my mouth
Originally posted by FastAnna
when I was 13 I wanted to be a video hoe so bad RSUV #7 | |
| | |
03-21-2017, 09:37 PM
|
#4 | | It's like going crazy when you're already nuts
Join Date: Aug 2005
Posts: 5,911
Thanked 3,069 Times in 796 Posts
Failed 90 Times in 38 Posts
| Quote:
Originally Posted by TOPEC what car is this? do u have a LSD or open diff? r u sure its not the open diff causing only 1 side to spin? | Toyota Matrix w/ an open diff.
The car is jacked up and free wheeling when I did those tests... I'm assuming there's not enough resistance where the open diff would come into play. Quote:
Originally Posted by fliptuner Did you clean the sliders/bores before re-lubing? Not uncommon for reman calipers to fail too. | Yes, I've relubed the sliders (not the bolt).
| |
| | |
03-21-2017, 09:45 PM
|
#5 | | Head of HR....have a seat on that couch
Join Date: Jan 2003 Location: Coquitlam
Posts: 21,878
Thanked 15,606 Times in 4,325 Posts
Failed 284 Times in 130 Posts
|
Did you use new brake hardware or clean the caliper mounts, where the pads sit?
__________________ feedback
Originally posted by v.b.
can we stop, my pussy hurts...
Originally posted by asian_XL
fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol
Originally posted by Fei-Ji
haha i can taste the cum in my mouth
Originally posted by FastAnna
when I was 13 I wanted to be a video hoe so bad RSUV #7 | |
| | |
03-21-2017, 09:47 PM
|
#6 | | It's like going crazy when you're already nuts
Join Date: Aug 2005
Posts: 5,911
Thanked 3,069 Times in 796 Posts
Failed 90 Times in 38 Posts
| Quote:
Originally Posted by fliptuner Did you use new brake hardware or clean the caliper mounts, where the pads sit? | All new hardware (except the caliper bracket bolts which shouldn't be a factor). I'm using the old rotors however.
| |
| | |
03-22-2017, 09:46 AM
|
#7 | | My dinner reheated before my turbo spooled
Join Date: Dec 2003 Location: Peace River, AB
Posts: 1,778
Thanked 158 Times in 103 Posts
Failed 41 Times in 14 Posts
|
Do you have ABS? Bad sensor or unit?
__________________ Quote: Unknown
"If someone has to pass you on the right, you are in the wrong lane." | | |
| | |
03-22-2017, 12:10 PM
|
#8 | | NOOB, Not Quite a Regular!
Join Date: Jul 2007 Location: vancouver
Posts: 33
Thanked 33 Times in 11 Posts
Failed 7 Times in 1 Post
|
Could be the master cylinder. A vent or replenishing port could be blocked preventing brake fluid from returning into the reservoir.
| |
| | |
03-27-2017, 02:15 AM
|
#9 | | I subscribe to Revscene
Join Date: Mar 2002 Location: Vancouver
Posts: 1,908
Thanked 315 Times in 100 Posts
Failed 29 Times in 6 Posts
|
let go of the steering wheel and brake, car pulls to any side?
| |
| | |
03-27-2017, 08:43 AM
|
#10 | | I Will not Admit my Addiction to RS
Join Date: Mar 2011 Location: Richmond BC
Posts: 517
Thanked 1,209 Times in 188 Posts
Failed 22 Times in 15 Posts
|
Check your brake lines ( The soft ones) If they swelled up then you'll have this issue
| |
| | |
03-27-2017, 11:29 AM
|
#11 | | 14 dolla balla aint got nothing on me!
Join Date: Nov 2007 Location: North Vancouver
Posts: 663
Thanked 335 Times in 88 Posts
Failed 2 Times in 2 Posts
|
What I find usually with brake pads at work is the paint or coatings on the pad portion that rides in the caliper bracket are really thick. It can sometimes cause the pad to bind and not return away from the rotor when you let off the brake pedal. I remove the paint(i use air tool with a sanding disc or gritty sand paper) from the ear + portion that slides on the bracket and give them a good coating of anti seize before installing.
__________________
Boost is not just a choice....It's a life style
1988 Toyota Supra - Mia
1990 Toyota Supra - Letty
1998 Toyota Aristo - Gisele (sold)
| |
| | |
03-27-2017, 11:32 AM
|
#12 | | Head of HR....have a seat on that couch
Join Date: Jan 2003 Location: Coquitlam
Posts: 21,878
Thanked 15,606 Times in 4,325 Posts
Failed 284 Times in 130 Posts
|
I do the same. I also wire brush the caliper mounts before installing the hardware kit.
__________________ feedback
Originally posted by v.b.
can we stop, my pussy hurts...
Originally posted by asian_XL
fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol
Originally posted by Fei-Ji
haha i can taste the cum in my mouth
Originally posted by FastAnna
when I was 13 I wanted to be a video hoe so bad RSUV #7 | |
| | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
All times are GMT -8. The time now is 01:47 PM.
|
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
