Vancouver Auto Chat 2016 VAC Community Head Moderator: Raid3n | | |
12-02-2017, 10:48 AM
|
#1 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
| *REVIEW* Snap n Go Blackvue hardwiring kit via OBD2 port
This is a great alternative to powermagic!
no need to mess with fuses and all that extra wiring crap and grounding....
just plug it into the OBD2 port of your car!
I tested it with blackvue models: DR380G, DR3500 and DR650S
all worked great. Test car: 2016 CIVIC EX
when the switch is set to ACC mode, the unit will power down the blackvue after 5mins once ignition is cut.
when the switch is set to parking mode, the unit will run the dashcam but will shut it down when battery level drops below 12V. https://www.7daycam.com
step 1: find your obdII port
step 2: plug in the SnapNgo unit
step 3: run the wiring up your a-pillar/roofline - hide it well...
step 4: attach power lead to dashcam
step 5: set the SnapNgo to acc and turn on car
step 6: flick switch to parking mode if needed
Last edited by Acura604; 12-02-2017 at 11:43 AM.
|
| |
12-02-2017, 01:45 PM
|
#2 | I *heart* Revscene.net very Muchie
Join Date: Jan 2005
Posts: 3,906
Thanked 438 Times in 240 Posts
Failed 20 Times in 15 Posts
|
Hope it works better than the Power Magic Pro. My first one died after one year and my second one let my battery drain.
|
| |
12-02-2017, 01:50 PM
|
#3 | To me, there is the Internet and there is RS
Join Date: Apr 2007 Location: Okanagan
Posts: 16,798
Thanked 9,482 Times in 4,138 Posts
Failed 429 Times in 227 Posts
| Quote:
Originally Posted by Acura604 no need to mess with fuses and all that extra wiring crap and grounding.... | Plugging in a fuse and bolting down one ground wire, what a hardship.
__________________ 1991 Toyota Celica GTFour RC // 2007 Toyota Rav4 V6 // 2000 Jeep Grand Cherokee
1992 Toyota Celica GT-S ["sold"] \\ 2007 Jeep Grand Cherokee CRD [sold] \\ 2000 Jeep Cherokee [sold] \\ 1997 Honda Prelude [sold] \\ 1992 Jeep YJ [sold/crashed] \\ 1987 Mazda RX-7 [sold] \\ 1987 Toyota Celica GT-S [crushed] Quote:
Originally Posted by maksimizer half those dudes are hotter than ,my GF. | Quote:
Originally Posted by RevYouUp reading this thread is like waiting for goku to charge up a spirit bomb in dragon ball z | Quote:
Originally Posted by Good_KarMa OH thank god. I thought u had sex with my wife. :cry: | |
| |
11-27-2018, 10:09 AM
|
#4 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
|
Blackvue has just released their own version now.... no more fuse box tapping b.s. https://www.blackvue.com/new-power-m...0HfDcvsRSkk0BQ |
| |
11-27-2018, 01:31 PM
|
#5 | RS has made me the bitter person i am today!
Join Date: Apr 2014 Location: Van
Posts: 4,801
Thanked 2,015 Times in 1,070 Posts
Failed 214 Times in 128 Posts
|
I've been interested in one of these but my question is does the camera usually drain enough to drop below 12v over night? And will the memory card even have enough capacity to record all night?
|
| |
11-27-2018, 01:35 PM
|
#6 | Performance Moderator
Join Date: Jun 2001 Location: Richmond
Posts: 16,831
Thanked 17,628 Times in 5,904 Posts
Failed 291 Times in 187 Posts
|
^ Yes it can, and you don't drive your car every day... say you leave it a couple days on the weekend it will be dead for sure.......... and yes that totally depends on the size of your memory card.
|
| |
11-27-2018, 02:25 PM
|
#7 | not the mod you're looking for
Join Date: Sep 2009
Posts: 3,743
Thanked 1,537 Times in 556 Posts
Failed 83 Times in 32 Posts
|
Would be awesome to use in conjunction with a Cobb AP...
|
| |
11-27-2018, 02:38 PM
|
#8 | 14 dolla balla aint got nothing on me!
Join Date: Sep 2005 Location: Vancouver
Posts: 647
Thanked 219 Times in 82 Posts
Failed 28 Times in 10 Posts
|
I think its better for enthusiasts especially here on Revscene to tap into fuse. Like what fn-2199 said cobb ap and also other obd2 accessories are used constantly. Plus you want to keep your camera on while dealerships and shops work on your car lol.
|
| |
11-27-2018, 03:18 PM
|
#9 | Where's my RS Christmas Lobster?!
Join Date: Jan 2003 Location: vancouver
Posts: 812
Thanked 723 Times in 140 Posts
Failed 252 Times in 38 Posts
| Quote:
Originally Posted by vash13 I think its better for enthusiasts especially here on Revscene to tap into fuse. Like what fn-2199 said cobb ap and also other obd2 accessories are used constantly. Plus you want to keep your camera on while dealerships and shops work on your car lol. | Everytime I bring my car in for service. Thise guy just unplug my camera and never plug it after they are done. Didnt notice the first time so I was driving for 3 days with the camera unplug
|
| |
11-27-2018, 03:34 PM
|
#10 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
|
FYI, i'll be testing the SNAP N GO for the thinkware F800 this weekend.
the kit is available for most thinkware, blackvue as well as mini usb/micro usb cams.
|
| |
11-27-2018, 04:42 PM
|
#11 | My homepage has been set to RS
Join Date: Mar 2008 Location: Vancouver
Posts: 2,193
Thanked 5,428 Times in 864 Posts
Failed 36 Times in 32 Posts
|
Anyone want to order one as well and split the shipping cost?
|
| |
11-27-2018, 05:18 PM
|
#12 | Media Officer / MOD
Join Date: Apr 2001 Location: vancouver
Posts: 28,077
Thanked 5,752 Times in 1,725 Posts
Failed 85 Times in 63 Posts
| Quote:
Originally Posted by Acura604 FYI, i'll be testing the SNAP N GO for the thinkware F800 this weekend.
the kit is available for most thinkware, blackvue as well as mini usb/micro usb cams. | For thinkware dashcams to get to parking mode it needs the 3 pole plug
it needs pos, acc and grnd
|
| |
11-27-2018, 07:32 PM
|
#13 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
|
^^^ so does the powermagic. This is an alternative. I’ll post my thinkware review with the snap n go kit next week.
|
| |
11-27-2018, 07:33 PM
|
#14 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
| Quote:
Originally Posted by SkunkWorks Anyone want to order one as well and split the shipping cost? | I have an extra one for blackvue series if interested.
|
| |
11-27-2018, 07:47 PM
|
#15 | Media Officer / MOD
Join Date: Apr 2001 Location: vancouver
Posts: 28,077
Thanked 5,752 Times in 1,725 Posts
Failed 85 Times in 63 Posts
| Quote:
Originally Posted by Acura604 ^^^ so does the powermagic. This is an alternative. I’ll post my thinkware review with the snap n go kit next week. | You sure?
in the pic it shows otherwise
Blackvue
Your snap go
|
| |
11-27-2018, 07:50 PM
|
#16 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
|
I’ve been using the snap n go for a year now. With a blackvue 650S and DR3500fhd. No issues. I’m sure blackvue has refined theirs as it’s a much newer version of essentially the same thing and that is obd2 connection for hardwiring.
Edit. For the record I don’t sell or promote these but it’s an excellent easy diy for those not wanting to tinker with the fuse box.
|
| |
11-27-2018, 07:53 PM
|
#17 | Media Officer / MOD
Join Date: Apr 2001 Location: vancouver
Posts: 28,077
Thanked 5,752 Times in 1,725 Posts
Failed 85 Times in 63 Posts
| Quote:
Originally Posted by Acura604 I’ve been using the snap n go for a year now. With a blackvue 650S and DR3500fhd. No issues. I’m sure blackvue has refined theirs as it’s a much newer version of essentially the same thing and that is obd2 connection for hardwiring.
Edit. For the record I don’t sell or promote these but it’s an excellent easy diy for those not wanting to tinker with the fuse box. | Did you use the snapngo with the thinkware?
The reason why I ask as mentioned above, thinkware dashcams from what I know needs the 3 pole plug which allows the camera to go to parking mode, a 2-pole plug won't allow the dashcam to go into parking mode and will just continuously record.
|
| |
11-27-2018, 07:54 PM
|
#18 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
| Quote:
Originally Posted by !Aznboi128 Did you use the snapngo with the thinkware?
The reason why I ask as mentioned above, thinkware dashcams from what I know needs the 3 pole plug which allows the camera to go to parking mode, a 2-pole plug won't allow the dashcam to go into parking mode and will just continuously record. | I’ve got the Thinkware version on order. Hope to have it by end of week to test on f800. Will post results next week.
|
| |
11-27-2018, 07:59 PM
|
#19 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
|
Also....the original powermagic is pictured as below (Needs ground and all dat jazzz). the above pic is the new blackvue obd2 powermagic designed to compete with the snap n go. |
| |
11-27-2018, 08:04 PM
|
#20 | Media Officer / MOD
Join Date: Apr 2001 Location: vancouver
Posts: 28,077
Thanked 5,752 Times in 1,725 Posts
Failed 85 Times in 63 Posts
|
My point was the ones you have posted should not work with Thinkware dashcams as they don't have the 3 pole plug. With Blackvue PMP you would need to use the thinkware Cig adapter that would not deliver acc/batt/ground to the dashcam enabling it to trigger the dashcam's parking mode.
With a Thinkware dashcam there's a built-in voltage regulator, it will cut power to the dashcam when it reaches the preset voltage. Thus not needed PMP etc.
It wouldn't make sense for Blackvue to make an obd2-> dashcam for Thinkware as how Blackvue enables parking mode is different.
|
| |
11-27-2018, 08:06 PM
|
#21 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
|
Well I’ll find out soon....making the switch from blackvue to thinkware this weekend.
|
| |
11-27-2018, 09:19 PM
|
#22 | Rs has made me the woman i am today!
Join Date: Jan 2011 Location: Vancouver DT
Posts: 4,322
Thanked 2,797 Times in 916 Posts
Failed 1,257 Times in 270 Posts
|
Wait till you're kid or you accidentally hit that Plug with you're knee . ITS SNAP N GO Alright
__________________
Fly Your Own Flag.
|
| |
11-28-2018, 12:38 AM
|
#23 | My homepage has been set to RS
Join Date: Mar 2008 Location: Vancouver
Posts: 2,193
Thanked 5,428 Times in 864 Posts
Failed 36 Times in 32 Posts
| Quote:
Originally Posted by Acura604 I have an extra one for blackvue series if interested. | Thanks but won't work for me, I need a mini USB. Not a Blackvue.
|
| |
11-28-2018, 04:25 AM
|
#24 | RS has made me the bitter person i am today!
Join Date: Apr 2001 Location: Vancouver
Posts: 4,780
Thanked 2,932 Times in 766 Posts
Failed 369 Times in 96 Posts
| Quote:
Originally Posted by SkunkWorks Thanks but won't work for me, I need a mini USB. Not a Blackvue. | I think I have that one also but always confused with mini vs micro. I had a shit ton of cheap chinese dashcams that use this connection but ended up selling them off... never used this.
This is the connection I have :
Last edited by Acura604; 11-28-2018 at 08:06 AM.
|
| |
11-28-2018, 02:39 PM
|
#25 | My homepage has been set to RS
Join Date: Mar 2008 Location: Vancouver
Posts: 2,193
Thanked 5,428 Times in 864 Posts
Failed 36 Times in 32 Posts
|
That's the one. I'll send you a PM now.
|
| | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | All times are GMT -8. The time now is 03:37 PM. |