You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
If you have any problems with the registration process or your account login, please contact contact us.
What hasn't Killed me, has made me more tolerant of RS!
Join Date: Oct 2004
Location: vancouver
Posts: 150
Thanked 0 Times in 0 Posts
Failed 0 Times in 0 Posts
Projector retrofit installer recommendation
Can anyone recommend a competent projector installer. It doesn't have to be a shop, it can be someone who works out of his home. The job is a direct bolt on type of job, no cutting or modification needed. Probably the hardest part would be to break open the headlight housing via an oven or heat gun. A bumper removal will be needed but from my car it is an easy affair and it can be done in less than 30 mins. TIA.
Originally posted by v.b. can we stop, my pussy hurts... Originally posted by asian_XL fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol Originally posted by Fei-Ji haha i can taste the cum in my mouth Originally posted by FastAnna when I was 13 I wanted to be a video hoe so bad
A projector retrofit is one of the easiest mods ever, as intimidating as it may seem to anyone who hasn't done one before.
Literally stick the headlight into the oven, 275 for 10 mins (or until lenses can easily be taken apart from housing), follow instructions on how to put projector into the housing, depending on the type of headlight (H4, 9006, etc) you may or may not need to aim first. After everything is done, simply stick back into oven and do 275 for another 10 mins, then clamp it real tight with new butyl and it's all good.
No need to pay anyone for several hours of work for something that takes a few hours and a beer or two.
A projector retrofit is one of the easiest mods ever, as intimidating as it may seem to anyone who hasn't done one before.
Literally stick the headlight into the oven, 275 for 10 mins (or until lenses can easily be taken apart from housing), follow instructions on how to put projector into the housing, depending on the type of headlight (H4, 9006, etc) you may or may not need to aim first. After everything is done, simply stick back into oven and do 275 for another 10 mins, then clamp it real tight with new butyl and it's all good.
No need to pay anyone for several hours of work for something that takes a few hours and a beer or two.
I've done quite a few retrofits and you should always check the rotation of the projector when installed on the car. It's honestly not worth it to pay someone to install a projector. If you're scared of screwing up. Go buy a spare set of headlights and use that to learn how it's done.
I've done a few retrofit kits before on my older cars, they say there is no cutting, but there always is, as basically you're hacking something in. It's not hard, biggest thing is be patient measure a few times cut once and the biggest pain is getting the lights to line up plus reseal the light so it doesn't leak. And yes be prepared to buy another set of head lights or have the down time to do it correctly. Over a period or 2-3 days don't expect to finish in 2-3 hours.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
