![]() |
WTB: 7 x 2.5 coilover springs Looking for a pair of springs for my cheapo set of coilovers to experiment with. Current springs are the standard 7 x 2.5 ID with a 400lb-in (7k/mm) Right now the coilovers sit way too low. If I raise the car up (via preload) the springs compress too far and windings contact themselves on bumps. A higher (stiffer) spring rate would allow for less sag, and less preload on the spring to get a higher height (dont worry about the effects on dampening, they suck) Let me know if you have a pair of springs stiffer than 400lbs for cheap. Track day is coming up real fast. |
All times are GMT -8. The time now is 02:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net