| WTB: 7 x 2.5 coilover springs
Looking for a pair of springs for my cheapo set of coilovers to experiment with. Current springs are the standard 7 x 2.5 ID with a 400lb-in (7k/mm)
Right now the coilovers sit way too low. If I raise the car up (via preload) the springs compress too far and windings contact themselves on bumps. A higher (stiffer) spring rate would allow for less sag, and less preload on the spring to get a higher height (dont worry about the effects on dampening, they suck)
Let me know if you have a pair of springs stiffer than 400lbs for cheap. Track day is coming up real fast.
| 
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
