3D Printing

[!LittleDragon]

Cheap ABS smells but good stuff like Polymaker doesn't really smell.

I was referring to ABS warping on open frame printers because ABS prints don't like drafts and cool ambient temps. That's why I built the Voron, it's enclosed so the internal print chamber gets up to about 60c so my ABS prints don't warp. Also, because it's enclosed, the smells don't get out. I didn't build this printer with a vent.

Larger animals will probably be okay... hope you don't have birds... lol

[Badhobz]

i got chihuahua's..... maybe this isnt such a good idea. this stuff seems highly poisonous to tiny fuzzy things.

[bcrdukes]

Who says the dogs need to be exposed to this stuff?

[Razor Ramon HG]

Just stick to safer filament like PLA and PETG. The general consensus is that an air purifier nearby and adequate ventilation in the room is enough. There aren't really any major VOCs that you need to worry about like styrene in ABS/ASA.

[Badhobz]

Originally Posted by bcrdukes

Who says the dogs need to be exposed to this stuff?

i should put it in my "guest" room that's frequented by my wife's cunty friend. I kinda wanna snuff her out anyways.

[!LittleDragon]

ABS is not for beginners anyways... especially if you don't have an enclosed printer. If you're just going to print things for looking at and throw in the trash, PLA is fine... it's the most common and easiest to print... and it's made from corn... lol

[Mikoyan]

Thanks partially due to the discussion here, I picked up a Bambu A1 with AMS Lite last month on sale.

Printed a bunch of stuff/tools to fix little things around the house, but Halloween's coming up, so costume props have been consuming printer time.

My kid wanted to be Antman, so we got a commercial costume and mask, but i resized a prop schematic i found online. Had to create/engineer the mounting system to the belt. The Pym vials are custom as is the disc holder, and the vials/regulator have magnets attached so they snap into the regulator.

I'm impressed by the detail level available even with FDM printing.

The ten rings took some finessing to print out clean with minimal support. They're designed hollow so I can put in glow bracelets to light them up. The blue light is just a quick lighting test. I also designed in magnets so that they self organize into a clean stack, but are still loose enough to jangle around on my wrists.

I haven't found a good Shang Chi top that I like yet, so I'm going as his dad, Wenwu. Going to do the flashback suit version. Grey suit, black shirt. Easy Peasy.