Quote:
Originally posted by Enraged
ryan: i was right! ha!  oil relief plug in the stock 7M-GTE oil filter bracket (as shown here: http://www.cygnusx1.net/supra/librar.../lu/LU_02.html and http://www.cygnusx1.net/supra/librar.../lu/LU_15.html ) only opens when oil pressure reaches 35-45 psi. so, by switching to an NA filter mount, oil reaches the oil cooler all the time. however, the downside is by having this set up, you can overcool your oil. so you need an oil thermostat to control how much oil goes to the cooler. luckily, an FC RX7 oil cooler for the 13B has an oil tstat built in. you have one at work, let me know how much and ill give you the cash
|
yae that amkes sence but wehat you told me is it close i was like no it doe snto
as in weaing the psi yaes the 7m gte does do that but theu have the same part number all have to look into thsi but don't put the na thign in it just dumb cause you oil weight will stay at 10 for to long and that is nto good
and most fo the time the revlife vavle is stuck open anys wasy crappy toyota