it's rare for the upper to do that but it does happen
other cause is ball joints easy to cheak
jack up one side front wheel place on block of wood or some thign less higher then jack stand
place bord under the wheel place block of wood under the the bord you just put down step on bord see if wheel has play up and down if so ball joint is dead
this wonte show sized ball joint thou to fin that out you will have to take the ball joint off sized ones will cause some wacky noise the loose one not so muhc but you have slop in you drive line
as for bushing it usely the lower bushings not the uppers
cheers ryan
Quote:
Originally Posted by Island_Yota
Something in my drive line is making alot of noise too, there's alot of play in it, im thinking it could be my upper control arm bushings I noticed a bit of play when I jacked the car up. No leaks from the rear end, usually it would be leaking by now if it was the crush sleeve/bearing, My car has the LSD and its working great.
BTW Enraged, the exhaust I bought off you sounds pretty crazy on an N/A, been running it for a month now I guess. Think I might try it without the test pipe, its really raspy, lost a bit of low end torque but gained a ton of top end.
|