REVscene Automotive Forum - View Single Post - Need to build office computer for my boss, help

John · 01-01-2010, 12:18 PM

To the best of my knowledge, all 1066 MHz DDR2 RAM requires more voltage than the stock 1.8V. There is no MB that I know of that will automatically increase RAM voltage to a value greater than 1.8V, based on SPD information.

Here is a typical pic of 1066 MHz DDR2 RAM. Note the recommended voltage to achieve this specified performance.

I would click "FAIL" for you if you would only re-enable the button!

01-01-2010, 12:18 PM	#24
John Where's my RS Christmas Lobster?! Join Date: Jul 2002 Location: Vancouver Posts: 892 Thanked 38 Times in 36 Posts Failed 10 Times in 6 Posts	To the best of my knowledge, all 1066 MHz DDR2 RAM requires more voltage than the stock 1.8V. There is no MB that I know of that will automatically increase RAM voltage to a value greater than 1.8V, based on SPD information. Here is a typical pic of 1066 MHz DDR2 RAM. Note the recommended voltage to achieve this specified performance. I would click "FAIL" for you if you would only re-enable the button! Last edited by John; 01-01-2010 at 12:25 PM.