Quote:
Originally Posted by syee
Temps seem alright for a stock unit. If I remember correctly the HSF has a switch for quiet and full speed mode. See if it's set for full speed to see if you can bring it down a bit more.
I wouldn't be too concerned now with the current temps. Did you take the MB picture before you reapplied thermal paste? The 84C is a bit too high if it's idle.
|
yeah that picture is from when I still had the problem of the computer not sitting upright lol. That same reading on the motherboard now reads 31 but the core temp monitoring program I downloaded shows them as higher then that but still 15 degrees lower then when I used the old thermal paste!!