|
I have a Greddy Profec B Spec II for sale. It's worked great for me and I get really good spool from it. I've gone standalone and am going to control boost with my standalone now. You would have to pick up a solenoid though. I believe they are about $110 from Greddy.
$100 takes it.
The boost spike is if you set the start boost to close to your final boost. Keep the start boost just a pound or two below your peak boost and it keeps the spike in control. e.g. Peak boost = 15 psi, set your start boost to roughly 13 psi. This will give you the best spool without the spikes. If your peak boost is 15 psi and you set your start boost to 15 psi, you will have great spool, but the EBC will not start to try to "check" the boost until it reaches 15 psi and the boos will keep climbing for a second afterwards, hence, spike.
|