Quote:
Originally Posted by inv4zn
The ignition lock cylinder might need to be replaced then, you're right.
I'm not sure if I'm allowed to link other forums, but if you google "6th gen accord ignition switch" there's a hit on a popular honda tech site with a very good DIY.
|
Ign sw. and ign lock cyl are two different things. It's usually the ign sw. that goes.
Check the main fuse, under the hood. Also, try jiggling the key while you're turning it on.
Older Accord but same priciples should apply:
Also give this a read:
http://www.ifixit.com/Guide/Installi...-Switch/3285/1