Hello everyone,
Here is my how-to on making your bike capable of charging your devices for under $5 a.k.a Phones, GPS, i-Products. ect..
Here is what I started off with but as you can see I bought a Y-connector $2.99 (From Princess Auto) and if you already have connectors you are set. I went a little over kill because I thought I would have to solder and use shrink wrap but that was not the case.
Extra: Feel free to add a in-line fuse if you like to.
Bike:GZ250 and CBR600rr
-----
This is my random shopping list, some random stuff I did not have on me so I had to purchase some new supplies for the garage. I would expect the bike lovers here to have some tools.
-----
Here we go, SNIP!
-----
Press my connectors.
-----
All connected!
-----
It lives !
-----
http://i53.photobucket.com/albums/g67/Tsukkie/20140520_201714_zps8e32c930.jpg[/IMG]
-----
Slide it out a little bit so you don't drain your battery.
-----
On the CBR.

-----

Thread through the fairing and waa-laa!
-----
THANKS FOR VIEWING !