Quote:
Originally Posted by Iron Chef
2 people, one pry bar, 1 long punch
1 person holds tension on the pry bar, one person hits the inner joint with a punch
Usually the shock of the impact will released the clip
Or use a bigger pry bar and hammer and hammer it
|
I hadn't thought to hit the inner joint, I'll definitely give this a shot tonight.
Quote:
Originally Posted by Klobbersaurus
you have the passenger side out? see if you can find a rod or something that will fit in the hole on the passenger side and stick it in the hole then hammer the shit out of it, should pop out the cv shaft out of the driver side
more than likely, your c-clip around the shaft is deformed or the splines are damaged if your having this much issue taking it out
|
I wanted to try that yesterday but couldn't find anything that would work, but I got something today so I'll definitely give this a shot tonight too.
I was thinking damaged splines could be the issue...
Quote:
Originally Posted by ICE BOY
^^^That. Or rotate the shaft 90* and try again, then repeat. Sometimes you have to get the clip in the right spot.
|
I've rotated it a good hundred times... no dice.