Got the car aligned at Dale's on Saturday. I need new tyres...so I'll be going back with PSS. Also had them swap the EBC Red brake bads to Girodisc SS pads and Anti-noise shims. I got fed up of the brake noise...ran them when I first got the car with great success and followed the same bed in procedure but they remained excruciatingly loud this time around for some reason despite a smooth rotor surface (pro-cut lathe). Had them flush the system as well...stuck with Motul RBF600
Installed the Binary Eng seat brackets on Saturday with a friend. It was a painless install and one of my favorite mods to date. As a tall guy the evos high seating position made it difficult trying to settle in but I lived with it. It was either legs good but steering and shifter too far or legs cramped under the steering while steering and shifter distance were good.
Seats out via the 4 14mm bolts and 6mm allen
New brackets on
Seats back in
About a solid 1.5-2" drop but it makes a world of difference. Should have done this a loooooong time ago.
Also installed some cf jdm rear extensions. I'm usually one to put performance before aesthetics but they were a gift and turned out pretty nice against the grey. I like subtle exterior mods...so I think I'll keep going along this vein:
Rexpeed carbon extensions:
Trip to Home Depot for hardware...M5 seems to do the trick
Double sided tape to check fit, drilled the bumper
and bolted them up for the finished look:
