What did you do to your vehicle today?

My unfamiliar-ness with the car failed me

Spoiler!

I discovered with 18x10 et25 275/35 the tire on the inside rubs on the coilover

I put the stock front wheel 18x7.5 and from the getgo there is little room

I even tried to put the rear wheel 8.5 and it wont fit! needs spacers
They weren't kidding when they said the 1 is a squashed version of the 3-series.lol

I put a 5mm spacer and it solved the rubbing issue

BUT now the issue is in the outer side since it was a perfect fitment already and now its gonna be pushed in an extra 5mm.
For the extra kick to the balls i already got a set of 275/35

The setback turned out to be a blessing in disguise (well thats what tell my self to feel better.haha)
I was having a buying remorse with the current tire that i got.lol
But luckily i was able to return the pair and they were having a sweet discount 400$ purchase -100$ off
Grabbed 265/35 for the front to compensate the 5mm spacer

Problem solved!

Went ahead and did the most nerve wracking mod i have ever done to a car ever!

Spoiler!

Its nerve wracking because i only got a one shot to do it right

The flare was not perfect in my eyes.You can see it pointing inwards at the end I hated that because i will have to push wheel to inside moer . That means the front part of the flare will have all that space and that bugs the shit out of me. I had to modify it to my liking

After working my magic,maneuvering ,bending, heating and taking alot of measurement . I felt satisfied with the new fitment
Here is a comparison (2nd piece is how it was intended to be mounted)

Gained more space
Shout out to rohit for the help!

Went ahead and install the rivet nuts

I love this thing! i feel like i can use it everywhere!

Fitment im very satisfied! i eliminate the inward bend

Because of the way i change the way the fender fit the 2nd piece is affected
I have to mod it again which im fine with

After more magic ,manuevering

Got em!

Overall i felt like i am the best person to do it because if i had just gave it to a body shop they would have fit it how it was originally intended to be mounted and i will be out of 2-3k AND BE VERY VERY DISAPPOINTED!
But In a perfect world it would be a bodyman working on it while im behind him coaching him every step on how i wanted it mounted .haha

I am very pleased with the result!

03-14-2016, 01:32 PM	#6854
jackp0t I Will not Admit my Addiction to RS Join Date: Feb 2010 Location: my car Posts: 583 Thanked 2,331 Times in 213 Posts Failed 21 Times in 6 Posts	My unfamiliar-ness with the car failed me Spoiler! I discovered with 18x10 et25 275/35 the tire on the inside rubs on the coilover I put the stock front wheel 18x7.5 and from the getgo there is little room I even tried to put the rear wheel 8.5 and it wont fit! needs spacers They weren't kidding when they said the 1 is a squashed version of the 3-series.lol I put a 5mm spacer and it solved the rubbing issue BUT now the issue is in the outer side since it was a perfect fitment already and now its gonna be pushed in an extra 5mm. For the extra kick to the balls i already got a set of 275/35 The setback turned out to be a blessing in disguise (well thats what tell my self to feel better.haha) I was having a buying remorse with the current tire that i got.lol But luckily i was able to return the pair and they were having a sweet discount 400$ purchase -100$ off Grabbed 265/35 for the front to compensate the 5mm spacer Problem solved! Went ahead and did the most nerve wracking mod i have ever done to a car ever! Spoiler! Its nerve wracking because i only got a one shot to do it right The flare was not perfect in my eyes.You can see it pointing inwards at the end I hated that because i will have to push wheel to inside moer . That means the front part of the flare will have all that space and that bugs the shit out of me. I had to modify it to my liking After working my magic,maneuvering ,bending, heating and taking alot of measurement . I felt satisfied with the new fitment Here is a comparison (2nd piece is how it was intended to be mounted) Gained more space Shout out to rohit for the help! Went ahead and install the rivet nuts I love this thing! i feel like i can use it everywhere! Fitment im very satisfied! i eliminate the inward bend Because of the way i change the way the fender fit the 2nd piece is affected I have to mod it again which im fine with After more magic ,manuevering Got em! Overall i felt like i am the best person to do it because if i had just gave it to a body shop they would have fit it how it was originally intended to be mounted and i will be out of 2-3k AND BE VERY VERY DISAPPOINTED! But In a perfect world it would be a bodyman working on it while im behind him coaching him every step on how i wanted it mounted .haha I am very pleased with the result! __________________ BB1 x DC5 x E82 Last edited by jackp0t; 03-14-2016 at 01:50 PM.