REVscene Automotive Forum - View Single Post

fliptuner · 11-29-2016, 01:57 PM

Might be hard to find hubcentric spacers that are only 6-8mm thick for a Taco. By that I mean both on the hub and to the wheel. Pretty sure the hub sticks out more than 8mm from the WMS.

You can probably find some that fit the hub perfectly but what does it really matter if the wheels become lugcentric anyways?

I found these ones, that should be close enough. Only 1mm off, if you can centre it before installing the wheel.
4X 6 Stud 1/4" 6mm Slip On Wheel Spacers For Nissan Toyota JDM Drift Turbo | eBay

Here's another possible option: If there's enough meat on the caliper/mount to facilitate it, clearance them, til the wheel fits. If it's a common swap, there should be how-to's on the subject.

11-29-2016, 01:57 PM	#5
fliptuner Head of HR....have a seat on that couch Join Date: Jan 2003 Location: Coquitlam Posts: 21,878 Thanked 15,606 Times in 4,325 Posts Failed 284 Times in 130 Posts	Might be hard to find hubcentric spacers that are only 6-8mm thick for a Taco. By that I mean both on the hub and to the wheel. Pretty sure the hub sticks out more than 8mm from the WMS. You can probably find some that fit the hub perfectly but what does it really matter if the wheels become lugcentric anyways? I found these ones, that should be close enough. Only 1mm off, if you can centre it before installing the wheel. 4X 6 Stud 1/4" 6mm Slip On Wheel Spacers For Nissan Toyota JDM Drift Turbo \| eBay Here's another possible option: If there's enough meat on the caliper/mount to facilitate it, clearance them, til the wheel fits. If it's a common swap, there should be how-to's on the subject. __________________ feedback Originally posted by v.b. can we stop, my pussy hurts... Originally posted by asian_XL fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol Originally posted by Fei-Ji haha i can taste the cum in my mouth Originally posted by FastAnna when I was 13 I wanted to be a video hoe so bad RSUV #7 Last edited by fliptuner; 11-29-2016 at 02:03 PM.