REVscene Automotive Forum - View Single Post - Exterior Design

fliptuner · 12-13-2016, 09:25 PM

Did you use mastic or mortar for the tiles? If mortar, was it modified or unmodified? Did you tile directly to the plywood?

Edit: I just re-read that you used the cement board under the tile. You want to use a modified thinset mortar - mastic shouldn't be used where moisture is present. Put a thin, scratch coat over the cement board. A 1/2"x1/2" square notch should be sufficient for what your doing. Back butter the tiles, set them with a bit of pressure, set your spacing and make sure they're flat to each other with a level. Wait 24hrs before grouting.

12-13-2016, 09:25 PM	#7
fliptuner Head of HR....have a seat on that couch Join Date: Jan 2003 Location: Coquitlam Posts: 21,878 Thanked 15,606 Times in 4,325 Posts Failed 284 Times in 130 Posts	Did you use mastic or mortar for the tiles? If mortar, was it modified or unmodified? Did you tile directly to the plywood? Edit: I just re-read that you used the cement board under the tile. You want to use a modified thinset mortar - mastic shouldn't be used where moisture is present. Put a thin, scratch coat over the cement board. A 1/2"x1/2" square notch should be sufficient for what your doing. Back butter the tiles, set them with a bit of pressure, set your spacing and make sure they're flat to each other with a level. Wait 24hrs before grouting. __________________ feedback Originally posted by v.b. can we stop, my pussy hurts... Originally posted by asian_XL fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol Originally posted by Fei-Ji haha i can taste the cum in my mouth Originally posted by FastAnna when I was 13 I wanted to be a video hoe so bad RSUV #7 Last edited by fliptuner; 12-13-2016 at 10:31 PM.