Your handle piece could be getting rusty/loose and not catching the on/off piece or maybe the plastic piece behind the handle is loose?
(The plastic piece lets you set how hot you can put your water. ei. mine only gets so hot even if you crank it all the water to hot)
Quote:
Originally Posted by Euro7r
Bumping. I noticed I haven't been getting "HOT" water in my showers at my house. Water is luke warm and it does get hot "ONLY" if I crank all the water to HOT end 100%, which never requires getting to the point. All the sinks work fine and can get hot water.
Usually when I turn on the shower, I move the lever from "Off" to middle to get water flowing, which typically releases "Warm/Decent Hot" water, which is perfect to get showers started, but last week, it's been releasing "Cold" water when I move the lever to the middle. I've been forced to move the lever closer to the "Hot" end, around half way between middle and "Hot" end, which typically never gets to that point unless I'm completely wasting water with a super long shower.
I have no idea what the issue is. Any thoughts guys?
 |