so im confused as hell. when my ratrolla is cold, i check the dip stick and it shows the oil is about 1/2 inch over the full mark. So i bought an oil extractor and removed 1/2 a litre and it was still showing over the full mark...
Then my neighbor told me to start it for a few second and let the system pressurize. Once i did that, and checked it again (with the oil flowing through the system) it shows 1/2 a litre under the min mark.
i dont get it.
According to the manual im suppose to check it after warming it up a few minutes and then let it drain back down into the sump. I did it, now its showing full after i put the oil i sucked out of it back in minus maybe 0.15L
this damn oil extractor is bullshit too. little drops of oil all over the place when its suppose to be "cleaner" than using the drain plug. my ass! those little plastic tubs flying around everywhere and no good place to store them. ended up duct taping them to a ladder to let them drain into my plastic oil pan.