Might be hard to find hubcentric spacers that are only 6-8mm thick for a Taco. By that I mean both on the hub and to the wheel. Pretty sure the hub sticks out more than 8mm from the WMS.
You can probably find some that fit the hub perfectly but what does it really matter if the wheels become lugcentric anyways?
I found these ones, that should be close enough. Only 1mm off, if you can centre it before installing the wheel.
4X 6 Stud 1/4" 6mm Slip On Wheel Spacers For Nissan Toyota JDM Drift Turbo | eBay
Here's another possible option: If there's enough meat on the caliper/mount to facilitate it, clearance them, til the wheel fits. If it's a common swap, there should be how-to's on the subject.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
